|
|
|
|
|
|
Oil Filter for Challenge and Pro-Cut Cutters
|
Our Price: USD$21.05
|
|
|
G24852 - Oil Filter for Challenge and Pro-Cut Cutters/Each
|
|
|
|
|
|
|
|
|
|
|
|
|
G34233 - Sequence Valve Replacement Kit - Down Sequence Only - Replaces Challenge Part Number 4536
|
|
Our Price: USD$350.00
|
|
|
This kit replaces Challenge part number 4536, that is no longer manufactured and has no exact replacement. The valve in our kit operates the same, and contains all needed fittings and hoses.
|
|
|
|
|
|
|
|
|
|
|
|
|
G34234 - Pilot Check Valve Kit - Replaces Challenge Part Number 4750
|
|
Our Price: USD$295.00
|
|
|
This kit replaces the Pilot Check Valve that mounts on the lower part of the knife cylinder. The original is no longer available, so this kit contains the valve, manifold, and a new pilot tube that replaces the original tube.
|
|
|
|
|
|
|
|
|
|
|
|
|
G34235 - Sequence Valve Replacement Kit - For Up Sequence Only - Replaces Challenge Part Number 4536
|
|
Our Price: USD$450.00
|
|
|
This kit replaces Challenge part number 4536, that is no longer manufactured and has no exact replacement. The valve in our kit operates the same, and contains all needed fittings and hoses.
|
|
|
|
|
|
|
|
|
|
|
|
|
G34237 - Hydraulic Hose Assembly - Same As Challenge Part Number - 4525
|
|
Our Price: USD$37.50
|
|
|
Hydraulic hose assembly with two female ends. Same as Challenge 4525.
|
|
|
|
|
|
|
|
|
|
|
|
|
G34250 - Vickers Power-Pack Shaft Oil Seal - Replaces Challenge Part Number S-1131
|
|
Our Price: USD$20.00
|
|
|
This seal replaces the drive shaft oil seal of all Vickers Power-Pack pumps used in Challenge cutters.
|
|
|
|
|
|
|
|
|
|
|
|
|
G43864 - Rubber Coupling Sleeve/Same as Challenge # 4114-R / Each
|
|
Our Price: USD$30.08
|
|
|
The 2.94" diameter motor coupling for hydraulic pumps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G43898 - Hydraulic Hose Assembly - Same as Challenge Part Number 4436
|
|
Our Price: USD$50.95
|
|
|
Hydraulic hose assembly that connects the cylinder with the pump. One female and one male end. Same as Challenge part # 4436.
|
|
|
|
|
|
|
|
|
|
|
|
|
G33983 - Oil Return Tube - Same as Challenge # V-119170 and B-3021-119170
|
|
Our Price: USD$295.00
|
|
|
Replaces original Vickers tube that is very prone to cracking.
|
|
|
|
|
|
|
|
|
|
|
|
|
G33984 - Rubber Coupling Sleeve/Same as Challenge # 4114-1-R / Each
|
|
Our Price: USD$45.23
|
|
|
The 3.75" diameter motor coupling for hydraulic pumps.
|
|
|
|
|
|
|
|
|
|
|
|
|
G33985 - Four-Way Valve/Same as Challenge # 4828-2/Each
|
|
Our Price: USD$775.00
|
|
|
Replacement valve for older Vickers brand pumps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G33986 - Spring Only For Challenge Cylinder Assembly # AA-9036
|
|
Our Price: USD$249.00
|
|
|
This spring wraps around the shaft of the blade cylinders on some Diamond models. The spring is prone to breaking.
|
|
|
|
|
|
|
|
|
|
|
|
|
G33987 - Anti Tie-Down Control Module/Same as Challenge # E-1440
|
|
Our Price: USD$275.00
|
|
|
Same as the black relay that requires both cut buttons to be pressed within .5 seconds of each other.
|
|
|
|
|
|
|
|
|
|
|
|
|
G33994- Tube Assembly - For Vickers Power Pack Models- Same as Challenge # 4538-2
|
|
Our Price: USD$35.00
|
|
|
This is the 1/4" tubing assembly that goes from the left side of the tank up to the Up Sequence Valve Assy., and on some models, also on the right side of tank up to the Down Sequence Valve Assy.
|
|
|
|
|
|
|
|
|
|
|
|
|
G48006 - Encoder For Challenge CDC - Factory Rebuilt - Core Exchange - Same as Challenge Part Number E-1527-3
|
|
Our Price: USD$945.00 (Actually $695 plus $250 Refundable Core Fee)
|
|
|
Encoder for Challenge CDC cutters. Rebuilt and tested by BEI, the original manufacturer. Challenge part number E-1527-3, no longer sold by Challenge. The price is actually $695 plus $250 Core Fee. Core exchange required.
|
|
|
|
|
|
|
|
|
|
|
|
|
G47767 - RELIEF CARTRIDGE - Same as Challenge Part Number 8031-1
|
|
Our Price: USD$144.69
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G47771 - 75 WATT BULB - Same as Challenge Part Number E-933-2
|
|
Our Price: USD$9.00
|
|
|
G47771 - 75 WATT BULB - Same as Challenge Part Number E-933-2
|
|
|
|
|
|
|
|
|
|
|
|
|
G47772 - FLUORESCENT LAMP - Same as Challenge Part Number S-845
|
|
Our Price: USD$11.00
|
|
|
G47772 - FLUORESCENT LAMP - Same as Challenge Part Number S-845
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G40475 - BACKGAUGE NUT - Reconditioned - With hardware included- Same as Challenge Part Number 4473
|
|
Our Price: USD$475.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G40476 - RELIEF VALVE - Reconditioned - Same As Challenge Part Number S-1132-3
|
|
Our Price: USD$249.00
|
|
|
|
|
|
|
|
|
|
