|
|
Polar paper cutter Knife Bolts (equivalent to the original Polar part number 200292). Fits Polar 107, Polar 112, Polar 115, Polar 137, Polar 145, Polar 150 and Polar 155 paper cutters. Socket head cap screw, M12 x 22mm long (.87") below the head. This bolt has a screwdriver slot cut in the threaded end, as shown in the photo, to help with removal if the allen key socket gets worn out over time and stripped. It has a black oxide surface finish for added corrosion resistance.
|
Knife Bolts (with captive washer) for many of the Polar X, XT, E and ED Paper Cutters (equivalent to the original Polar part numbers 409569, 409569b, and 256691). These bolts were also used on some of the later EMC-MON models. (These DO NOT fit the Polar 78 X, 78 XT, 78 XS, 92 X, 92 XT and 92 XS paper cutters. These cutters use our G48029 knife bolts.)
|
