You are here: Home > Stitching > Deluxe (Including Bostich & ISP) Stitching Heads, Machines, and Parts > Deluxe (& Bostich) and Interlake (ISP) Stitching Heads
Choose a sub category:
G5 Stitching Head G8 Stitching Head G20 Stitching Head
Magnatek Stitching Head 26/26D Head M2000 Stitching Head
18D Stitching Head DB45 Stitching Head DB75V/DB75VS Stitching Head
Osako Stitching Head Other Deluxe Stitching Heads
G5 Stitching Head G8 Stitching Head G20 Stitching Head

G5 Stitching Head

The G5 Head is easy to use and a low-cost alternative for collators requiring a smaller capacity head with greater reliability.

G8 Stitching Head

The side-feed design eliminates the Swivel, wire jamming and dropped stitches.

G8 Loop Stitching Head

The standard G8 Head with 24 gauage wire can be converted to a Loop style by exchanging the following three sub-assemblies: the Wire Holder Assembly, the Cutter Block Assembly and the Bender Bar Assembly.

G20 Stitching Head

The G20 head features a side-feed design eliminating the need for a swivel which results in increased production speeds and decreased down-time.

Magnatek Stitching Head 26/26D Head M2000 Stitching Head

Magnatek Stitching Head

The Magnatek has been engineered and developed to provide you with the finest equipment available for your stitching needs. With proper care and maintenance it will give you years of satisfactory efficient service.

26/26D Stitching Head

Click here for a pdf of.... 26/26D Manual

The 26/26D head is one of the most popular style heads in the world for both OEMs and end users alike. It is used in literally hundreds of collator applications, as well with a host of different stitcher machines.

M2000 Stitching Head

The M2000 Stitching Head has been engineered and developed to provide you with the finest equipment available for your stitching needs.

18D Stitching Head DB45 Stitching Head DB75V/DB75VS Stitching Head

18D Stitching Head

The 18D Head is used predominantly by large printers because of its excellent reputation for reliability. The 18D is extremely versatile and handles a wide range of wire and crown sizes.

DB45 Stitching Head

The DB45 Head is a slim-line alternative Stitcher Head for Muller-Martini saddle binders. The DB45 can be used on all stitchers or collators which currently use the HK45 and HK55 Heads.

DB75V/DB75VS Stitching Head

High-quality alternative Stitcher Heads for Muller-Martini saddle binders. The DB75 and DB75V can be used on all stitchers or collators which currently use the HK75 and HK75V Heads.

Osako Stitching Head Other Deluxe Stitching Heads

Osako Stitching Head


There are a complete line of replacement stitcher heads available for Osako saddle stitching lines, designed with features to make them some of the most reliable heads available.

Click here for a PDF of.... Osaka Head Exploded View Diagram of Parts