STANDARD FEATURES
Powerful gear drive for the knife
Digital servo drive positioning system for the backgauge
Hydraulic clamp
Stainless steel plated and slot-less cutting table:
Cutting table and side tables with air bed
Storage capacity of 30,000 programs
Serial and USB port
CIP3 / CIP4 enabled
LED table light and cut line indicator
Built-in knife hoist with setting gauges and knife guard:
Self-monitoring safety light barrier
Two-hand cut control
Complete rear table guarding
Overload protection device
AVAILABLE OPTIONS
Enlarged air side tables
Carbide tipped blades
Lift kit for taller working height (Increasing the table height to 37 1/4" from 34 1/4")
Smart clamp (limited clamping stroke)
Low pressure device (for corrugated and pressure sensitive material)
Barcode scanner (Opens program from barcode/No CIP 3/4 necessary):
S2C package (Straight To Cut), with bar code scanner and CIP3/4 network connectivity
|
Cutting Table Width
|
31.5 " / 800 mm
|
|
Feed Height
|
4.7 " / 120 mm
|
|
Useful Rear Table Length
|
36.2 " / 920 mm
|
|
Stainless Steel Air Side Tables
|
13 " x 20.1 " / 330 mm x 510 mm
|
|
Minimum Cut without False Clamp
|
0.7 " / 18 mm
|
|
Minimum Cut with False Clamp
|
1.9 " / 48 mm
|
|
Clamping force
|
450 - 5620 lb / 2 - 25 kN
|
|
Overall Machine Width
|
62.6" / 1590 mm
|
|
Overall Machine Length
|
79.4" / 2015 mm
|
|
Overall Height
|
57.5" / 1460 mm
|
|
Table Height
|
34.3" / 870 mm
|
|
Front Of Table To Cut Stick
|
28.94" / 735 mm
|
|
Length Of Machine (With Enlarged Side Tables)
|
90.75" / 2305 mm
|
|
Width Of Machine (With Enlarged Side Tables)
|
80.71" / 2050 mm
|
Very straightforward and safe blade changes. See video below for demonstration:
