Slot covering green belt (Polar 222178)

Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Table Slot Belting >

G53754 - Slot covering green belt (Polar 222178)

Our Price: USD$146.00

Product Code: G53754

Description

Slot covering tape or belt for some of the Polar 115 CS, Polar 115 CE, and Polar 115 EMC I guillotine paper cutters. This ONLY fits between machine serial numbers 4831001 to 4831804, and for Polar 115 EMC cutters between machine serial numbers 4836001 to 4836040. These cutters were built only in approximately 1978.

Features

This green backgauge table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 222178. It is an aftermarket belt which is made from the same material as the original.

It measures 60 mm wide (2 3/8 inches wide) by 1.25mm thick (.050 inches thick). As shown in the photo, both ends have the mounting slots and holes cut out.

This style of belt does not have the center "V" guide on the bottom side.

Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Table Slot Belting

	G40503 - Stitching Wire/Round/26 Gauge/On 5 lb. Spool/Galvanized/Per Spool USD$17.30 Per Spool
	G12641 - Adjusting Foot - Deluxe Part #CB828A USD$11.00
	G22761 - Stahl Part # 2007690100 - Perforating Blade/Split (Rd.)/15 Teeth/For 35mm Shaft/62mm OD x 40mm ID x 0.5mm TK USD$19.24
	G51164 - Bolt M55/L - Hohner Part #3155413 USD$36.20
	G34353 - Sliding shoe adjustment head side - Hohner Part #9977545 USD$1,285.10
	206 Composition Cover [8-1/2" X 11", Green, Square Corner, No Window, Unpunched] Pack 100 USD$52.83
	G25918 - Kit - G8 Crank Drive - Deluxe Part #G8KC USD$416.00
	G32289 - Screw, Former Detent - Hohner Part #3265406 USD$22.90
	G25904 - Stitcher Head Assembly - Loop - Deluxe Part #G8HD24BL USD$2,490.00