Slot covering tape or belt for some of the Polar 115 CS, Polar 115 CE, and Polar 115 EMC I guillotine paper cutters. This ONLY fits between machine serial numbers 4831001 to 4831804, and for Polar 115 EMC cutters between machine serial numbers 4836001 to 4836040. These cutters were built only in approximately 1978.

This green backgauge table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 222178. It is an aftermarket belt which is made from the same material as the original.

It measures 60 mm wide (2 3/8 inches wide) by 1.25mm thick (.050 inches thick). As shown in the photo, both ends have the mounting slots and holes cut out.

This style of belt does not have the center "V" guide on the bottom side.