Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies >

G47770 - False Clamp Pin (40 mm or 1.58" long)
G47770 - False Clamp Pin (40 mm or 1.58" long)
 
Our Price: USD$13.70


Availability:: Usually Ships in 24 Hours
Product Code: G47770

Description
 
Please Note: This False Clamp Pin requires the Anvil or our False Clamp Pin Tool for proper installation. See G36095-False Clamp Pin Tool or G47768 - Anvil for False Clamp Pin
Features
This false clamp pin is for use on Polar paper cutters and is equivalent to Polar part #232338. It is 40 mm (1.58") long and notched as shown with flats cut on both sides of the large diameter area of the shank. It fits all models of the newer Polar guillotine paper cutters (those made after approximately 1985).


These quality false clamp pins are made in the USA.

For installation, the underside of the original pin must be drilled or ground off, then the pin can be knocked out with a hammer and punch. After inserting a new pin, the bottom end of the pin gets hammered or peened over to install in your Polar false clamp.

Also see our G47769 - False Clamp Pin for false clamp pins that were used on earlier Polar cutters, generally pre-1985.


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies
Services > False Clamp Repair & Fabrication
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Polar Clamp Area Parts


G53777 - Polar EMC 2 Pump Pulley Assembly 231482 and 231481 USD$340.00
G24092 - Clincher Block 7/16 Cr - Deluxe Part #A535E USD$127.00
G52698 - Needle Bearing, 8 x 12 x 12 - Hohner Part #4457101
G52267 - DO NOT USE- See Part #76040081 - Hohner Part #7604008
G14964 - Cam - Deluxe Part #RBM1638F USD$237.00
Drill Blocks/Lawson/Seybold/24" Long x 1-1/8" Wide x 3/8" Thick/Oblong/Wood/Long Grain/Per 3 Dozen USD$108.14 Per Three (3) Dozen
G31953 - Plate, former nose - Hohner Part #3167519 USD$22.50
G21083 - Former RH 25-28 Wire, DB45 (Replaces 0305.2014.4) - Deluxe Part #040548-25 USD$131.00
G50561 - Round Belt HSB7000 - Hohner Part #3149209 USD$67.50