Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Machine Parts >

G51004 - Hydraulic Clamp Cylinder - Rebuilt w/Core Exchange - Same as Challenge #A-8411
G51004 - Hydraulic Clamp Cylinder - Rebuilt w/Core Exchange - Same as Challenge #A-8411
 
Our Price: USD$750.00


Product Code: G51004

Description
 
Rebuilt and tested hydraulic knife cylinder. Cylinder price is $750 plus $500 refundable Core Exchange Fee.
Features
We rebuild these cylinders in our machine shop.
We first pressure test the body for cracks that may leak. Cracks are welded and tested again.
All seals and wipers are replaced, regardless of condition, with the highest quality modern seals.
The cylinders are then compression tested to approx 30% - 50% over the rated PSI and checked for any leaks.
Cylinders that pass, are painted.

Core Exchange
To maintain inventory, we require a core cylinder to be returned to us for credit. When you purchase a rebuilt cylinder, you will be charged a core fee, that is included in the listed price. When we receive your old cylinder, inspect it, and find it to be rebuildable, you will be refunded the fee. (Usually within 3 days of us receiving the core)
  • If you do not have a core, the fee will remain added to the cost.
  • Not all cores are salvageable.


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Machine Parts
Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Hydraulic Cylinders

Product price is not filled in. This product cannot be purchased.



G16010 - Guide Shaft for Pull Arm in Polar 92 EMC II Paper Cutter USD$106.00 Each
G24137 - Hollow Drill Bit/For IRAM Sterling Drills/Long Length/3" Capacity/1/2" Diameter/Teflon USD$32.80 Each
G32832 - Bushing, Orion 1 - Hohner Part #4400088 USD$12.50
G23009 - Replaced By: UB3912.2 - Deluxe Part #7280
G26201 - Kit - M-Series Tool - Deluxe Part #M-TOOL KIT USD$287.00
G44555 - Driver, Loop Stitch 7mm - Hohner Part #3163461 USD$424.70
302 Clear Cover [8-1/2" X 14", C lear Gloss, w/ Tissue, 10 Mil, Unpunched, Square Corner]Pack 100 USD$25.80
G52259 - Pin - DIN 7979 6x36 - Hohner Part #6306036 USD$2.50
G14243 - Cam, Special / Metal Stitchers - Deluxe Part #D38364F USD$166.00