High Speed Shrink Tunnels PP1808-72 (18”W x 8”H x 72”L chamber)

Home > Packaging > Shrink Packaging Equipment >

High Speed Shrink Tunnels PP1808-72

Call for price

Product Code: G53912

Description

The Preferred Pack® PP1808-72 Tunnel with 18”W x 8”H x 72”L chamber

Features
The Preferred Pack® PP1808-72 Tunnel with 18”W x 8”H x 72”L chamber is a general purpose shrink tunnel that can be used for a wide variety of applications. Can be used with shrink bands, neck bands, full body sleeves, used with shrink film, used as drying or curing tunnel etc.

Highlights:

Fully Re-Circulating Air Chamber
Live Roller Rod Conveyor
Digital Temperature Control 0-400°
Adjustable Air Velocity Control
State-of-the-Art AC Variable Speed Drive 0-75 FPM
Chromed Conveyor Rollers and Shaft (No Rust)
Automatic Tunnel Cool Down with Shut Off
Dual 1HP Blower Motors
Sealed Bearings on Drive and Idler Shafts
Chamber Size 18”W x 8”H x 72”L
Quietest Tunnel on the Market
Heats up to 300° F in less than 15 minutes
Thermal Overload Protection on All Motors
Locking Casters
Adjustable leveling pads 35” - 39.5”
Anti-Jam Safety Features on Conveyor
Dual 9 KW Heater Banks
2 year warranty

Options:

12” and 16” Tunnel Opening
Close Roller Spacing 1/2” Gap
Teflon Mesh Belt
Stainless Steel Metal Mesh Belt

Specifications:

G Code	Model No.	Chamber Size	Speed	Blower Motor	Heater Bank	Air Velocity	Power
G53912	PP1808-72	18"W x 8"H x 72"L	0-75 FPM	Dual 1HP	Dual 9 kW	Dual Controls	220V, 3 Phase, 50 Amps
G53913	PP1808-96	18"W x 8"H x 96"L	0-75 FPM	Dual 1HP	Dual 9 kW	Dual Controls	220V, 3 Phase, 70 Amps
G53914	PP2210-72	22"W x 10"H x 72"L	0-75 FPM	Dual 1HP	Dual 9 kW	Dual Controls	220V, 3 Phase, 75 Amps
G53915	PP2210-96	22"W x 10"H x 96"L	0-75 FPM	Dual 1HP	Dual 9 kW	Dual Controls	220V, 3 Phase, 80 Amps
G53916	PP2612-72	26"W x 12"H x 72"L	0-75 FPM	Dual 1HP	Dual 9 kW	Dual Controls	220V, 4 Phase, 75 Amps

Browse for more products in the same category as this item:

Packaging > Shrink Packaging Equipment

Product price is not filled in. This product cannot be purchased.

	G11296 - Wire Spool - Galvanized - Deluxe Part #2024G10 USD$98.70
	G50248 - Bender Assembly,43/6, Flat Wire I-III - Hohner Part #9964322 USD$1,073.40
	G12207 - Pin - Deluxe Part #CB2170 USD$5.40
	G52907 - Replaced By: MMKFG1 - Deluxe Part #0881.0057.4
	Timing Belt/Rosback S-1382 USD$49.31
	G40271 - Terminal - Deluxe Part #CB2302P USD$3.85
	G26413 - Face Plate Clamp - McCain - Deluxe Part #SA-348A USD$42.45
	Spiral Plastic Coil 5:1 12" [13 mm (17/32"), White] Box 100 USD$19.65
	G39340 - Former Slide Dowel - Deluxe Part #BD250 USD$10.60