Home > Shear Bolts (Polar, Prism, Saber, Wohlenberg) >

G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
 
Our Price: USD$34.00


Product Code: G40532

Description
 
G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
Features
Steel Shear Bolt for Polar 145, 150EL & 155CE Paper Cutters (221301) This steel shear bolt fits Polar 145, 150EL and 155CE paper cutters. The main shank on this shear pin is 80mm (3.15") long below the head. It has an M14 thread. A matching hex nut is also supplied with each bolt. (205518)
Steel Shear Bolts for Polar 145EL, Polar 150EL, Polar 150CE, Polar 155CE, and Polar 155 EMC (up to serial number 5221060) Paper Cutters. (equivalent to Polar 221301, 221302, 206685) The largest diameter on the shank on these shear pins or safety bolts is 14mm (.54"), except where it is undercut. It is 80mm (3.15") long below the head. It has an M14 thread.
A matching hex nut is also supplied with each of these shear bolts. (equivalent to Polar nut number 205518) Note that some of these were originally supplied with through holes at the break point and some were originally supplied with a groove at the break point. Both styles of safety bolts are interchangeable as they have been engineered to break at the same load. This shear bolt does not fit most of the Polar 155 EMC II cutters, or the Polar 155 E and Polar 155 ED paper cutters. For shear bolts for these machines, which only use one safety bolt per pull arm assembly, and with the cross pin through the head, see our part number G40533.


Browse for more products in the same category as this item:

Shear Bolts (Polar, Prism, Saber, Wohlenberg)
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Polar Shear Bolts

Product price is not filled in. This product cannot be purchased.

Product price is not filled in. This product cannot be purchased.



G33006 - Hex Nut, Stop Stitch Control Valve Festo #205273 - Hohner Part #6910100 USD$6.20
Spiral Plastic Coil 5:1 12" [7 mm (9/32"), Red] Box 100 USD$9.27
G44784 - Shoe tounge, Loop stitch RH - Hohner Part #9441591 USD$1,164.00
G24062 - Replaced By: CB93 - Deluxe Part #A309E
G33298 - Stitching ruler - Hohner Part #9403670 USD$589.50
G48935 - Post Stitcher, 1-1/4 Cr - Arcuate, 16 inch Throat, (.103X.023 Wire) 115VAC/60Hz - Deluxe Part #HF16P-AST-1-1/4CR-ARC USD$8,950.00
Male Scoring Disc Red 220-414 USD$62.18
G54198 - Replaced By: 072017 - Deluxe Part #0030.0029
G40331 - Upper Wire Tube, Hybar Wire, 5/16 Cr - Deluxe Part #G20481 USD$44.70