Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Gearbox, Flywheel And Pull Arm Area Parts >

G53776 - Polar Paper Cutter Pump Pulley 014187 and 014188
G53776 - Polar Paper Cutter Pump Pulley 014187 and 014188
 
Our Price: USD$310.00


Product Code: G53776

Description
 
V Belt Split Pulley Assembly for some Polar CE and EMC (EMC 1) Paper Cutters. (equivalent to Polar the original Polar part numbers 014188, 014187, and also 014183) This precision machined aluminum split pulley is a direct replacement for the original die cast pulley used on the tapered output shaft on some of the Polar Model CE hydraulic pumps, and on the 115 EMC 1, and 155 EMC 1 cutters. This pulley has been Hardcoat Anodized to give maximum hardness and wear resistance to the belt contact surfaces.
Features
V Belt Split Pulley Assembly for some Polar CE and EMC (EMC 1) Paper Cutters. (equivalent to Polar the original Polar part numbers 014188, 014187, and also 014183) This precision machined aluminum split pulley is a direct replacement for the original die cast pulley used on the tapered output shaft on some of the Polar Model CE hydraulic pumps, and on the 115 EMC 1, and 155 EMC 1 cutters. This pulley has been Hardcoat Anodized to give maximum hardness and wear resistance to the belt contact surfaces.
Included is both pulley halves, four steel adjusting shims (our part number G53774), and the three bolts to hold the two halves together. Each shim is .5mm (.020") thick. The pulleys have threaded steel inserts installed where the two pulley halves bolt together, similar to the originals, to prevent the screw threads from stripping out in the aluminum.
This is the "Long Hub" version of this pulley assembly. The hub length measures approximately 7/8". (See our part number G53775 for the 1/2" long "Short Hub" version.)
Fits Polar 72 CE paper cutter models after machine serial number 4851001.
Fits Polar 115 CE paper cutter models after machine serial number 4732001.
Fits all Polar 115 EMC 1 paper cutter models.
Fits all Polar 150 CE paper cutter models.
Fits all Polar 155 CE paper cutter models.
Fits all Polar 155 EMC 1 paper cutter models.
Made in USA.


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Gearbox, Flywheel And Pull Arm Area Parts
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Polar Hydraulic Parts

Product price is not filled in. This product cannot be purchased.



Seybold Blade/97.750" L x 5.000" W x .496" Tk/84"/Series 60 CFH-8A/Standard Inlaid/Each USD$1,216.00 Each
G25890 - Stitcher Head Assembly, Bolt Mount - Loop - Deluxe Part #G8BHD241/2L USD$2,490.00
G41047 - Replaced By: CBBB5000Y (Kit - includes Stud, Handle & Hardware) - Deluxe Part #CB1785
G51532 - Relay, 24VDC - Hohner Part #4218011 USD$70.70
G24258 - Wire Guide Loop Spring - Deluxe Part #BF50 USD$13.10
G45024 - Clincher Pusher, Assy 70/20 - HSS - Hohner Part #9967615 USD$158.90
G31704 - Driver, 8mm Loop M50/8 - Hohner Part #3159484 USD$278.50
G13208 - Slide Plate, Model P - Deluxe Part #CE46 USD$187.00
G34377 - Drift Wrench Assembly/Challenge Part #A-6588 USD$59.00