Home > Shear Bolts (Polar, Prism, Saber, Wohlenberg) >

G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
 
Our Price: USD$34.00


Product Code: G40532

Description
 
G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
Features
Steel Shear Bolt for Polar 145, 150EL & 155CE Paper Cutters (221301) This steel shear bolt fits Polar 145, 150EL and 155CE paper cutters. The main shank on this shear pin is 80mm (3.15") long below the head. It has an M14 thread. A matching hex nut is also supplied with each bolt. (205518)
Steel Shear Bolts for Polar 145EL, Polar 150EL, Polar 150CE, Polar 155CE, and Polar 155 EMC (up to serial number 5221060) Paper Cutters. (equivalent to Polar 221301, 221302, 206685) The largest diameter on the shank on these shear pins or safety bolts is 14mm (.54"), except where it is undercut. It is 80mm (3.15") long below the head. It has an M14 thread.
A matching hex nut is also supplied with each of these shear bolts. (equivalent to Polar nut number 205518) Note that some of these were originally supplied with through holes at the break point and some were originally supplied with a groove at the break point. Both styles of safety bolts are interchangeable as they have been engineered to break at the same load. This shear bolt does not fit most of the Polar 155 EMC II cutters, or the Polar 155 E and Polar 155 ED paper cutters. For shear bolts for these machines, which only use one safety bolt per pull arm assembly, and with the cross pin through the head, see our part number G40533.


Browse for more products in the same category as this item:

Shear Bolts (Polar, Prism, Saber, Wohlenberg)
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Polar Shear Bolts


G22872 - Stahl Part # 2130310100 - Perforating Blade/Punch/16 Teeth/For 50mm Shaft/81mm OD x 55mm ID x 0.9mm TK USD$73.50
G13846 - Face Plate Assembly, S3A - Deluxe Part #D30193A USD$1,795.50
G32476 - DO NOT USE - Main Frame, 48/5S - replaced with #3661003
G39627 - Wire Guide Spring Clip - Deluxe Part #OSK101-2 USD$6.55
G38008 - TEC Lighting TruCoat UV Coater - TRUV-21D - Hand-feed 21in Flood Coater Call For Your Price
G26636 - Pin - Deluxe Part #UB3108.2 USD$15.30
3:1 Oval (Coil) 0.333″ Pitch USD$2,200.00
G38010 - TEC Lighting TruCoat UV Coater - TRUV-16D - Hand-feed 16in Flood Coater Call For Your Price
Lawson-Wohlenberg Blade/16.688 x 4.527 x .395/Model 44FS50, A43, 38F/Wohlenberg RT340/Carbide Inlaid/Each USD$807.50 Each