Home >

High Capacity Shrink Tunnel PP3620-96
High Capacity Shrink Tunnel PP3620-96
 
Call for price


Product Code: G53908

Description
 
The Preferred Pack® PP3620-96 Shrink Tunnel with 36”W x 20”H x 96”L chamber
Features
The Preferred Pack® PP3620-96 Shrink Tunnel with 36”W x 20”H x 96”L chamber is a general purpose shrink tunnel that can be used for a wide variety of applications. Can be used with shrink bands, neck bands, full body sleeves, used with shrink film, used as drying or curing tunnel etc.

Highlights:
  • Fully Re-Circulating Air Chamber
  • Live Roller Rod Conveyor
  • Digital Temperature Control 0-400°
  • Adjustable Air Velocity Control
  • State-of-the-Art AC Variable Speed Drive 0-75 FPM
  • Chromed Conveyor Rollers and Shaft (No Rust)
  • Automatic Tunnel Cool Down with Shut Off
  • 1HP Blower Motor
  • Sealed Bearings on Drive and Idler Shafts
  • Chamber Size 36”W x 20”H x 96”L
  • Quietest Tunnel on the Market
  • Heats up to 300° F in less than 15 minutes
  • Thermal Overload Protection on All Motors
  • Locking Casters
  • Adjustable Leveling Pads 35” - 39.5”
  • Anti-Jam Safety Features on Conveyor
  • 15 kW Heater Bank
  • 2 year warranty
Options:
  • 16”, 20”, 24” or 28” Tunnel Height
  • Close Roller Spacing 1/2” Gap
  • Teflon Mesh Belt
  • Stainless Steel Metal Mesh Belt

Specifications:
G Code Model No. Chamber Size Speed Blower Motor Heater Bank Air Velocity Power
G53907 PP3612-60 36"W x 12"H x 60"L
 		0-75 FPM
 		Dual 1HP Dual 15kW Dual Controls
 		220V, 3Phase, 60 Amps
G53908 PP3620-96 36"W x 20"H x 96"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53909 PP4512-60 45"W x 12"H x 60"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53910 PP5520-72 55"W x 20"H x 72"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53911 PP6520-96 65"W x 20"H x 96"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps




Product price is not filled in. This product cannot be purchased.



G48019 - Oswego & Seybold Citation Paper Cutter Knife Bolt USD$14.60
G54015 - DO NOT USE - Adjusting Block, 43/6, SEE PART # 9964027 - Hohner Part #3164026
G41350 - Gripper - Hohner Part #3150065 USD$310.20
G11237 - Staples, Model 110, 1/2 (12mm) Leg Length - Deluxe Part #4921050 USD$8.00
G39349 - Replaced By: SP20810 - Deluxe Part #154-0019
G21144 - Feed Release Handle (Replaces 0022.0270) - Deluxe Part #070119 USD$22.90
G39210 - Former LH Arc'd - 7/16 Cr - Deluxe Part #116H213 USD$355.00
G32147 - Pin, Orion I - Hohner Part #3240208 USD$27.10
G49186 - Cutter Pivot 1/2 Crown (Replaces: FS25-164) - Deluxe Part #SP20598 USD$92.10