Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Table Slot Belting >

G53751 - Slot covering green belt, 033956, ZA3.033956
G53751 - Slot covering green belt, 033956, ZA3.033956
 
Our Price: USD$292.00


Product Code: G53751

Description
 
Slot covering belt or table slot cover tape for the later models of the Polar 92 S, Polar 92 E, and Polar 92 ED paper cutters. This belt fits cutters built after machine serial number 6401101.
Features
Slot covering belt or table slot cover tape for the later models of the Polar 92 S, Polar 92 E, and Polar 92 ED paper cutters. This belt fits cutters built after machine serial number 6401101. Also fits Polar 92 X, Polar 92 XT, and Polar 92 N models. (Always check your parts book before ordering. There are many variations with these belts. The original part number is usually located on page 20.22 of the Polar parts books.) This green table slot cover band or back gauge belt is equivalent to, and a direct replacement for, the original Polar part number 033956 and ZA3.033956. It is an aftermarket belt which is made from the same material as the original. It contains the center "V" guide which is fused to the belt. Measures 60 mm wide (2 3/8" wide) by 1.25mm thick (.050" thick). The cogged center "V" guide is 10 mm wide. As shown in the photo, one end has the mounting slots cut out, the other end has the two mounting grommets installed. For earlier Polar 92 slot covering belts, see our part number G53749


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Table Slot Belting

Product price is not filled in. This product cannot be purchased.



Muller-Martini Blade/20.472" L x 5.512" W x .236" Tk/Top front/890.0535.2F/Standard Inlaid/Each USD$384.75 Each
G42007 - Cutter Box Assy, M50/8 Lg Rd and Flat Wire - Hohner Part #9959240 USD$1,110.00
Seybold Blade/61.000" L x 5.000" W x .496" Tk/50"/Dayton 6ZD278B/Carbide Inlaid/Each Call for Pricing
G41245 - Loop Stitch Conversion, 48/5 - Hohner Part #0548051 - Discontinued
G50331 - DO NOT USE, New #9959508 March 2003 SN 4437 up to 5531 - Hohner Part #9959635
G48878 - Replaced By: CD2384 & CDD3019 - Deluxe Part #D37036A
G12902 - Kit, Knife Clutch Roll Pin - Deluxe Part #CBBB3000M7 USD$3.70
G40320 - Screw M2.5x0.45x12, Torx Modified - Deluxe Part #G20433B USD$5.35
G44577 - Center Slide, Loop, 43/6S - Hohner Part #3164437 USD$148.90