Home >

High Capacity Shrink Tunnel PP3620-96
High Capacity Shrink Tunnel PP3620-96
 
Call for price


Product Code: G53908

Description
 
The Preferred Pack® PP3620-96 Shrink Tunnel with 36”W x 20”H x 96”L chamber
Features
The Preferred Pack® PP3620-96 Shrink Tunnel with 36”W x 20”H x 96”L chamber is a general purpose shrink tunnel that can be used for a wide variety of applications. Can be used with shrink bands, neck bands, full body sleeves, used with shrink film, used as drying or curing tunnel etc.

Highlights:
  • Fully Re-Circulating Air Chamber
  • Live Roller Rod Conveyor
  • Digital Temperature Control 0-400°
  • Adjustable Air Velocity Control
  • State-of-the-Art AC Variable Speed Drive 0-75 FPM
  • Chromed Conveyor Rollers and Shaft (No Rust)
  • Automatic Tunnel Cool Down with Shut Off
  • 1HP Blower Motor
  • Sealed Bearings on Drive and Idler Shafts
  • Chamber Size 36”W x 20”H x 96”L
  • Quietest Tunnel on the Market
  • Heats up to 300° F in less than 15 minutes
  • Thermal Overload Protection on All Motors
  • Locking Casters
  • Adjustable Leveling Pads 35” - 39.5”
  • Anti-Jam Safety Features on Conveyor
  • 15 kW Heater Bank
  • 2 year warranty
Options:
  • 16”, 20”, 24” or 28” Tunnel Height
  • Close Roller Spacing 1/2” Gap
  • Teflon Mesh Belt
  • Stainless Steel Metal Mesh Belt

Specifications:
G Code Model No. Chamber Size Speed Blower Motor Heater Bank Air Velocity Power
G53907 PP3612-60 36"W x 12"H x 60"L
 		0-75 FPM
 		Dual 1HP Dual 15kW Dual Controls
 		220V, 3Phase, 60 Amps
G53908 PP3620-96 36"W x 20"H x 96"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53909 PP4512-60 45"W x 12"H x 60"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53910 PP5520-72 55"W x 20"H x 72"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53911 PP6520-96 65"W x 20"H x 96"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps




Product price is not filled in. This product cannot be purchased.



Muller-Martini Blade/Muller-Grapha (Minute-Man)/13.976 x 2.560 x .236/Top right side/1522 Trimmer/890.0537.3/AKI-III Material/Each USD$175.75 Each
G13075 - Wire Feed Gear, S2F - Deluxe Part #CD2347D USD$231.00
G31414 - Driver - Hohner Part #3103534 USD$270.40
G15036 - Hand Wheel - Deluxe Part #RBM1775F USD$56.00
G34061 - Self-Adhesive Stainless Steel Shim Tape ACCU-SHIM 2 - .002" x 33 Feet (.05mm x 10m) USD$16.80
G26489 - Screw 8-32x3/8 - Deluxe Part #UA2806.1
G49014 - Shoe Spring - Deluxe Part #D31956F USD$8.65
G44280 - Bearing Pin, HSS12 - Hohner Part #3156424 USD$51.00
G50587 - See Part #9946980 - Hohner Part #9600000