Home > Creasing, Scoring and Perforating > Rotary-type Scoring and Perforating - MBO, Stahl, Rosback > Rotary-type Scoring, Perforating and Slitting On MBO or Stahl Folders > Scoring On Folders- All > Letterpress Quality Scoring Sets >

G31260 - Letterpress Quality Score Set - For 25mm Shaft/Per Set
G31260 - Letterpress Quality Score Set - For 25mm Shaft/Per Set
 
Our Price: USD$415.00


Availability:: Usually Ships in 24 Hours
Product Code: G31260

Description
 
G31260 - Score Set-For 25mm Shaft/Per Set
Convert your folder into a precision scoring machine!
These scoring sets mount to the exit shafts of your folder. The male die forces the sheet being rolled through it into a slot on the female die. They produce a near letterpress quality score, and permit scoring in the first folding unit (without folding) and then folding in the right angle unit inline!
The male unit is usually mounted on the lower shaft, and comes with two widths of replaceable scoring wheels. The unit is held in place by a brass-tipped set screw, and is mountable anywhere on the shaft.
The female unit has three slots in it, each a unique width and depth, for different types of stocks. It is held in place with a brass tipped set screw, and is mountable anywhere on the shaft.
Each set includes:
1 Female Die
1 Male Die
1 Thin Score Wheel
1 Thick Score Wheel
1 T-Handle Tool
Instructions
Important Note:
These wheels will only work on machines with adjustible exit shafts. When ordering, make sure you measure the diameter of the exit shafts of the unit that you will mount the set on. The sets are available for the common 25mm, 30mm, and 35mm shaft sizes.


Browse for more products in the same category as this item:

Creasing, Scoring and Perforating > Rotary-type Scoring and Perforating - MBO, Stahl, Rosback > Rotary-type Scoring, Perforating and Slitting On MBO or Stahl Folders > Scoring On Folders- All > Letterpress Quality Scoring Sets
Folding

Product price is not filled in. This product cannot be purchased.



G21882 - Bonnet Clamp Handle - Deluxe Part #18005BA USD$79.70
G33098 - Allen cap screw: DIN 912: M4x30mm - Hohner Part #7904030 USD$1.30
G22639 - Stahl Part # 2007590300 - Perforating Blade/Split/18 Teeth/25mm Shaft/48mm x 30mm x 0.5mm USD$10.40
G49889 - Shrink Wrap/Sytec 701/15" Roll/Per Roll Please contact us for pricing.
G34295 - Gripper Pad - Hohner Part #3183198 USD$19.10
G43898 - Hydraulic Hose Assembly - Same as Challenge Part Number 4436 USD$99.95
G22819 - Replaced By: G20170 - Deluxe Part #6608000
G30987 - O-ring Kit for Challenge Part #S-1156 Seal USD$6.00
G33437 - Wire Spring, Standard - Hohner Part #9463168 USD$95.60