Home > Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products >

Channel Matrix - Size 150 - Gray - Center Type
Channel Matrix - Size 150 - Gray - Center Type
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34086 for 4 or 6 point locators, and G34087 for 6 or 8 point locators.
Our Price: USD$75.20


Product Code: G38122

Description Technical Specs
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34086 for 4 or 6 point locators, and G34087 for 6 or 8 point locators.
Features
  • Our metal backed Matrix is extruded right onto the perforated steel backing, allowing the plastic to penetrate the steel and give it a stronger bond.
  • It is also extruded with a slight taper to the edges.
  • Good for hand fed presses and cylinder presses since the metal back retains its rigidity when working on a cylinder that may be worn.
  • Less expensive than the Mylar base counterparts.
  • Generally a short to medium run length matrix.
  • Color coded for quick identification of channel size.


Browse for more products in the same category as this item:

Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart


G52021 - Wire Spool - Galvanized High Tensile - Deluxe Part #25G5HT USD$97.40
G14098 - Switch Toggle - Deluxe Part #D32132F USD$46.80
G12534 - R Former Leg 7/16, H20AYA .023 - Deluxe Part #CB60E7 USD$320.00
G12528 - R Former Leg 7/16, .103 X .017 / .020 - Deluxe Part #CB60 USD$99.60
G39049 - Shim, DB75VS (Replaces 0023.0955) - Deluxe Part #078006 USD$2.90
G11856 - Bender Bar Assembly 1/2 Cr, 21x25 Magnatek - Deluxe Part #CAAA9013J2 USD$588.00
G49363 - Bronze Knife Bearing - Left Side - Polar 92 USD$290.00 Each
G11813 - Stitch Head, Magnatek ( B2000 ) - Deluxe Part #CAAA2004U USD$1,290.00
G24279 - Clincher Point - Round - Deluxe Part #C120B USD$7.00