Polar Cutter Knife Bolt 256691 and 409569b

Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Knife Mounting Bolts >

Our Price: USD$14.90

Availability:: Usually Ships in 24 Hours
Product Code: G48094

Description

Technical Specs

G48094 - Polar Cutter Knife Bolt 256691 and 409569b

Features

Knife Bolt for Polar X, XT, E and ED Paper Cutters Polar P#409569, 419520.

These fit the following Polar Paper Cutters: 78X, 78XT, 78E, 78ED, 92X, 92XT, 92E, 92ED, 115X, 115XT, 115E, 115ED, 137X, 137XT, 137E, 137ED, 155X, 155XT, 155E, 155ED, 176X, 176XT, 176E, 176ED.

Zinc plated, grade 12.9, hex head cap screws. Included with each bolt is a 4mm thick zinc plated washer made from heat treated 4140 steel. 24.5mm long below the washer. The washer is threaded to keep it in place.

Knife Bolts (with captive washer) for many of the Polar X, XT, E and ED Paper Cutters (equivalent to the original Polar part #s 409569, 409569b, and 256691). These bolts were also used on some of the later EMC-MON models. (These DO NOT fit the Polar 78 X, 78 XT, 78 XS, 92 X, 92 XT and 92 XS paper cutters. These cutters use our G48029 knife bolts.)

These zinc plated, hex head cap screws have a 12 mm diameter thread. Included with each bolt is a heavy 4mm thick zinc plated washer (equivalent to the original Polar part #s 419520 and 419520b) made from heat treated 4140 steel. These blade bolts are 24.5mm long below the washer. The washer is threaded to keep it in place. It will spin in place but will not fall off.

For a "T" Wrench for this bolt see our Part # G48176.

Also see our part #s G48021, G48022, G48029, G47898, and G47899 for knife bolts which fit older models of Polar Paper Cutters.

Please note that the photo shows 2 pieces for clarity. Price is for 1 piece with the washer.

Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Knife Mounting Bolts
Cutting, Trimming and Slitting
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Polar Knife Mounting Bolts

	Chandler & Challenge & Old Pre-50 Pavyer Knife Bolt USD$13.10