Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Machine Parts >

G51008 - Hydraulic Clamp Cylinder - For TCM 42in- Rebuilt w/core exchange - Same as Challenge Part #A-8427-1
G51008 - Hydraulic Clamp Cylinder - For TCM 42in- Rebuilt w/core exchange - Same as Challenge Part #A-8427-1
 
Our Price: USD$750.00


Product Code: G51008

Description Technical Specs
 
G51008 - Hydraulic Clamp Cylinder - For TCM 42in- Rebuilt w/core exchange - Same as Challenge Part Number A-8427-1

Rebuilt and tested hydraulic knife cylinder. Cylinder price is $750 plus $500 refundable Core Exchange Fee.
Features
We rebuild these cylinders in our machine shop. We first pressure test the body for cracks that may leak. Cracks are welded and tested again. All seals and wipers are replaced, regardless of condition, with the highest quality modern seals. The cylinders are then compression tested to approx 30% - 50% over the rated PSI and checked for any leaks. Cylinders that pass, are painted.

Core Exchange
To maintain inventory, we require a core cylinder to be returned to us for credit. When you purchase a rebuilt cylinder, you will be charged a core fee, that is included in the listed price. When we receive your old cylinder, inspect it, and find it to be rebuildable, you will be refunded the fee. (Usually within 3 days of us receiving the core)
  • If you do not have a core, the fee will remain added to the cost.
  • Not all cores are salvageable.


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Machine Parts
Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Hydraulic Cylinders

Product price is not filled in. This product cannot be purchased.



G52113 - MiniStitcher 115V, 60HZ - High Performance Series - Deluxe Part #IMSHP-A25 USD$3,180.00
Set of Knives Two-Up Punch 8MM USD$3,597.70
G12697 - Set Screw 5/16-18 X 1 - Deluxe Part #CB890 USD$2.75
G44146 - Screw 7/16-14x2-1/4 - Deluxe Part #UA7136.1 USD$8.80
G14352 - Cutting Block Control Cam - Deluxe Part #D49073F USD$468.00
Lawson-Wohlenberg Blade/16.688 x 4.527 x .395/Model 44FS50, A43, 38F/Wohlenberg RT340/Standard Inlaid/Each USD$251.75 Each
G55588 - Air Motor Pivot Adapter Plate - Deluxe Part #CD1769B-6 USD$620.00
G49068 - Replaced By: SP20672 - Deluxe Part #FS25-131
G52265 - DO NOT USE- See Part #7006000V - Hohner Part #7006000