Home > Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products >

G38115 - Channel Creasing Matrix - Size 90 - Red - Center Type
G38115 - Channel Creasing Matrix - Size 90 - Red - Center Type
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34072.
Our Price: USD$75.20


Product Code: G38115

Description Technical Specs
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34072.
Features
  • Our metal backed Matrix is extruded right onto the perforated steel backing, allowing the plastic to penetrate the steel and give it a stronger bond.
  • It is also extruded with a slight taper to the edges.
  • Good for hand fed presses and cylinder presses since the metal back retains its rigidity when working on a cylinder that may be worn.
  • Less expensive than the Mylar base counterparts.
  • Generally a short to medium run length matrix.
  • Color coded for quick identification of channel size.


Browse for more products in the same category as this item:

Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart


G44336 - Plate, frame rear HSS-18/6 - Hohner Part #3168003 USD$395.60
G23115 - Hollow Drill Bit/For Iram-Sterling Drills/Long Length/3" Capacity/5/16" Diameter/Uncoated USD$34.19 Each
G52024 - Bonnet Sub Assembly (26D) - Special Cut - Deluxe Part #2601M-S USD$508.00
G11215 - Binderymate 405A (110v / 60hz) - Deluxe Part #4709111 USD$5,610.00
G44818 - Counter sunk screw HSB - Hohner Part #86062511 USD$6.00
G52634 - Leaf spring - Hohner Part #3934563 USD$46.40
G52078 - Stitch Head 1/2 Cr, 21x25 Wire, M2000 - Solid Clincher Plate - Deluxe Part #CTTT2605B3 USD$1,450.00
G52059 - Clincher Block 5/8 Cr - Arm - Deluxe Part #CB187R8 USD$307.00
G23869 - Clutch Latch Plate - Deluxe Part #A1132 USD$55.70