Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Machine Parts >

G51004 - Hydraulic Clamp Cylinder - Rebuilt w/Core Exchange - Same as Challenge #A-8411
G51004 - Hydraulic Clamp Cylinder - Rebuilt w/Core Exchange - Same as Challenge #A-8411
 
Our Price: USD$750.00


Product Code: G51004

Description
 
Rebuilt and tested hydraulic knife cylinder. Cylinder price is $750 plus $500 refundable Core Exchange Fee.
Features
We rebuild these cylinders in our machine shop.
We first pressure test the body for cracks that may leak. Cracks are welded and tested again.
All seals and wipers are replaced, regardless of condition, with the highest quality modern seals.
The cylinders are then compression tested to approx 30% - 50% over the rated PSI and checked for any leaks.
Cylinders that pass, are painted.

Core Exchange
To maintain inventory, we require a core cylinder to be returned to us for credit. When you purchase a rebuilt cylinder, you will be charged a core fee, that is included in the listed price. When we receive your old cylinder, inspect it, and find it to be rebuildable, you will be refunded the fee. (Usually within 3 days of us receiving the core)
  • If you do not have a core, the fee will remain added to the cost.
  • Not all cores are salvageable.


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Machine Parts
Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Hydraulic Cylinders


G25965 - Hex Jam Nut 5/16-18 - Deluxe Part #HN51618.2 USD$1.55
G13724 - Stitch Head 1/2 Cr, 25 Rd Wire, M2000 - Horizon - Deluxe Part #CTTT2605Q3 USD$1,290.00
G41710 - Compression Spring, former M55L - Hohner Part #3955442 USD$23.90
G21996 - Clincher Cam Lever - Right - Deluxe Part #18383A USD$269.00
G11944 - Driver End 7/16 Cr, .103x.023 Flat - Deluxe Part #CB117H USD$227.00
G22769 - Stahl Part # 2007490200 - Perforating Blade/Split/18 Teeth/For 35mm Shaft/62mm OD x 40mm ID x 0.5mm TK/No Mounting Hole/Each USD$12.00
G44285 - Wire Guide, HSS12 - Hohner Part #3156437 USD$67.50
G32704 - Angular Screw connection 1/4" - Hohner Part #4200054 USD$79.10
G21669 - Stationary Cutter 1/2 - Deluxe Part #15100-20 USD$32.40