Home >

High Capacity Shrink Tunnel PP4512-60
High Capacity Shrink Tunnel PP4512-60
 
Call for price


Product Code: G53909

Description
 
The Preferred Pack® PP4512-60 Shrink Tunnel with 45”W x 12”H x 60”L chamber
Features
The Preferred Pack® PP4512-60 Shrink Tunnel with 45”W x 12”H x 60”L chamber is a general purpose shrink tunnel that can be used for a wide variety of applications. Can be used with shrink bands, neck bands, full body sleeves, used with shrink film, used as drying or curing tunnel etc.

Highlights:
  • Fully Re-Circulating Air Chamber
  • Live Roller Rod Conveyor
  • Digital Temperature Control 0-400°
  • Adjustable Air Velocity Control
  • State-of-the-Art AC Variable Speed Drive 0-75 FPM
  • Chromed Conveyor Rollers and Shaft (No Rust)
  • Automatic Tunnel Cool Down with Shut Off
  • 1HP Blower Motor
  • Sealed Bearings on Drive and Idler Shafts
  • Chamber Size 45”W x 12”H x 60”L
  • Quietest Tunnel on the Market
  • Heats up to 300° F in less than 15 minutes
  • Thermal Overload Protection on All Motors
  • Locking Casters
  • Adjustable Leveling Pads 35” - 39.5”
  • Anti-Jam Safety Features on Conveyor
  • 15 kW Heater Bank
  • 2 year warranty
Options:
  • 16”, 20”, 24” or 28” Tunnel Height
  • Close Roller Spacing 1/2” Gap
  • Teflon Mesh Belt
  • Stainless Steel Metal Mesh Belt

Specifications:
G Code Model No. Chamber Size Speed Blower Motor Heater Bank Air Velocity Power
G53907 PP3612-60 36"W x 12"H x 60"L
 		0-75 FPM
 		Dual 1HP Dual 15kW Dual Controls
 		220V, 3Phase, 60 Amps
G53908 PP3620-96 36"W x 20"H x 96"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53909 PP4512-60 45"W x 12"H x 60"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53910 PP5520-72 55"W x 20"H x 72"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53911 PP6520-96 65"W x 20"H x 96"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps




Product price is not filled in. This product cannot be purchased.



G39119 - Replaced By: G20239 - Deluxe Part #4011251
G47767 - RELIEF CARTRIDGE - Same as Challenge Part Number 8031-1 USD$144.69
G13175 - Oil Tube, 1 X 1/4 O.D., Model P & 510 - Deluxe Part #CE126 USD$15.60
Drill Blocks/Nygren-Dahly/Baum/6-1/2" Long x 1-1/4" Wide x 5/16" Thick/Wood/End Grain/Per 3 Doz USD$35.60
G44592 - Reversing Plate, 70/20 - Hohner Part #3167275 USD$176.00
G14033 - Cutter Block Tilt Crank Arm, N3B - Deluxe Part #D31810F USD$161.00
G26619 - Screw 1/2-13x4 - Deluxe Part #UA8164 USD$4.60
G13068 - Guard, Finger - End Of Conveyor23640 - Deluxe Part #CD2341 USD$215.00
G33637 - Bender Assy. Std 52/8, 24-26 Rd. Wire.. - Hohner Part #9963316 USD$1,076.90