Home > Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products >

Channel Matrix - Size 150 - Gray - Center Type
Channel Matrix - Size 150 - Gray - Center Type
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34086 for 4 or 6 point locators, and G34087 for 6 or 8 point locators.
Our Price: USD$75.20


Product Code: G38122

Description Technical Specs
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34086 for 4 or 6 point locators, and G34087 for 6 or 8 point locators.
Features
  • Our metal backed Matrix is extruded right onto the perforated steel backing, allowing the plastic to penetrate the steel and give it a stronger bond.
  • It is also extruded with a slight taper to the edges.
  • Good for hand fed presses and cylinder presses since the metal back retains its rigidity when working on a cylinder that may be worn.
  • Less expensive than the Mylar base counterparts.
  • Generally a short to medium run length matrix.
  • Color coded for quick identification of channel size.


Browse for more products in the same category as this item:

Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart

Product price is not filled in. This product cannot be purchased.



G12497 - Cutter Blade 1/4 Arcuate - Deluxe Part #CB57E3 USD$52.50
G39694 - Centering Guide Spring - Deluxe Part #OSK119-A USD$2.45
G25223 - Dowel Pin 1/4x5/8 - Deluxe Part #G20809 USD$1.60
G50314 - Curved Washer, 52/8S - Hohner Part #9300101 USD$0.70
G49953 - valve HSB - Hohner Part #4500024 USD$88.60
Challenge Knife Bolt Washer - Same As Challenge Part Number S-1083-1 USD$1.50
G39323 - Replaced By: 078001 - Deluxe Part #0881.0374.4
G25312 - Cam Follower Stud - Deluxe Part #G30022 USD$50.00
G53587 - Driver Rail, M301 Type - Hohner Part #3157435