Home > Shear Bolts (Polar, Prism, Saber, Wohlenberg) >

G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
 
Our Price: USD$34.00


Product Code: G40532

Description
 
G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
Features
Steel Shear Bolt for Polar 145, 150EL & 155CE Paper Cutters (221301) This steel shear bolt fits Polar 145, 150EL and 155CE paper cutters. The main shank on this shear pin is 80mm (3.15") long below the head. It has an M14 thread. A matching hex nut is also supplied with each bolt. (205518)
Steel Shear Bolts for Polar 145EL, Polar 150EL, Polar 150CE, Polar 155CE, and Polar 155 EMC (up to serial number 5221060) Paper Cutters. (equivalent to Polar 221301, 221302, 206685) The largest diameter on the shank on these shear pins or safety bolts is 14mm (.54"), except where it is undercut. It is 80mm (3.15") long below the head. It has an M14 thread.
A matching hex nut is also supplied with each of these shear bolts. (equivalent to Polar nut number 205518) Note that some of these were originally supplied with through holes at the break point and some were originally supplied with a groove at the break point. Both styles of safety bolts are interchangeable as they have been engineered to break at the same load. This shear bolt does not fit most of the Polar 155 EMC II cutters, or the Polar 155 E and Polar 155 ED paper cutters. For shear bolts for these machines, which only use one safety bolt per pull arm assembly, and with the cross pin through the head, see our part number G40533.


Browse for more products in the same category as this item:

Shear Bolts (Polar, Prism, Saber, Wohlenberg)
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Polar Shear Bolts


G40478 - ASSEMBLY BOX BRACKET - Reconditioned - Same As Challenge Part Number A-4492 USD$75.00
G25342 - Teflon Bearing 3/8x1/2 - Deluxe Part #G30050 USD$11.50
G12409 - Lower Connecting Link Screw - Deluxe Part #CB450A USD$14.20
G48172 - Former Nose, M55L - Hohner Part #3155448 USD$91.60
G32772 - Rectifier, Accord 25/40 - Hohner Part #4300106 USD$903.70
G40505 - Stitching Wire/Flat/20 x 24 Gauge/On 5 lb. Spool/Tinned/Per Spool USD$20.25 Per Case of Ten Spools
G23899 - Idler Tension Spring - Deluxe Part #A1160 USD$20.80
G34307 - timing belt RPP5 - Hohner Part #4200985 USD$39.60
G40281 - Decal, Binderymate 2 - Deluxe Part #CF1900H3 USD$7.00