Home >

“All-in-One” L-Sealer with Shrink Chamber 76STC
“All-in-One” L-Sealer with Shrink Chamber 76STC
 
Call for price


Product Code: G53783

Description
 
Semi-Automatic L-Sealer and Hooded Shrink Chamber in one complete unit. Will seal and shrink PVC or Polyolefin shrink films.

Simply place product onto loading tray between the centerfold shrink film and advance the package into the sealing area. Then lower the hooded chamber and the magnets apply seal pressure to seal and cut film. The hooded chamber will then heat up and shrink the package. When shrink cycle is complete the magnets will release the hooded chamber to open so operator can remove package.
Features
Simply place product onto loading tray between the centerfold shrink film and advance the package into the sealing area. Then lower the hooded chamber and the magnets apply seal pressure to seal and cut film. The hooded chamber will then heat up and shrink the package. When shrink cycle is complete the magnets will release the hooded chamber to open so operator can remove package.

"Band Seal Technology” - No more seal wires to replace
Will seal PVC or Polyolefin shrink films
Automatic Pin Wheel Hole Punch
Independent Seal and Shrink time control
Dual Mode Switch - Seal only or Seal and Shrink
Precision temperature control 0-500 degrees for chamber heat
Easy load film holder for max 24” wide film roll
Adjustable Product Loading Tray
Adjustable grate lowers for tall package sizes
Automatic “Magnetic Hood Hold Down” - Keeps chamber closed automatically during shrink cycle
Heavy duty 1/2 HP blower motor
Locking Casters

Versions:

G Code Model #
Seal Dimensions
Max Pkg Height Volts Amps Phase Film Width
G53778 PP-48ST-110V 12" W x 18.5" L
 6" 110 20 1 20" max
G53781 PP-48ST-220V 12" x 18.5" L
 6"
 220 10 1 20" max
G53782 PP-76ST 16" W x 22" L
 8" 220 25 1 24" max
G53783 PP-76STC 16" W x 22" L 8"
 220 30 1 24" max
G53784 PP-76ST-SS
 16" W x 22" L 8" 220 25 1 24" max
G53785 PP-77ST
 20" W x 30" L
 8" 220 30 1 28" max

Product price is not filled in. This product cannot be purchased.



G32496 - Hard rubber-pin - Hohner Part #3703417 USD$23.80
G26334 - Clincher Lever Spring - Deluxe Part #PG10262 USD$6.00
G21485 - Former RH - Deluxe Part #115H94 USD$315.00
G11199 - Replaced By: B3000-AST (Stitch'n Fold Bookletmaker B2000 ) - Deluxe Part #4602002
G22333 - Stitching Wire/Round/25 Gauge/On 5 lb. Spool/Galvanized/Per Spool USD$17.55 Per Spool
G32772 - Rectifier, Accord 25/40 - Hohner Part #4300106 USD$903.70
G23343 - Ring Terminal - Deluxe Part #87583B USD$2.80
G51004 - Hydraulic Clamp Cylinder - Rebuilt w/Core Exchange - Same as Challenge #A-8411 USD$750.00 ($600 plus $300 Refundable Core Chg)
G40561 - Stitching Wire/Round/27 Gauge/On 5 lb. Spools/Tinned/Per Case of Ten Spools USD$183.70 Per Case of Ten Spools