Home > Cutting, Trimming and Slitting > Blades and Cutting Sticks > Many More Brands of Blades (Atlas to Wohlenberg, etc.) > Schneider Senator Blades > Model 92 (36") >

Blade/Senator/42.913" L x 5.197" W x .392" Tk/36"/92/Standard Inlay/Each
Blade/Senator/42.913" L x 5.197" W x .392" Tk/36"/92/Standard Inlay/Each
 
List Price: USD$590.00
Our Price: USD$560.50


Availability:: Usually Ships in 24 Hours
Product Code: G33894

Features
 
Features

About Blade Materials:

Nearly all blades for paper cutters are actually two pieces of metal permanently bonded together. The area along the cutting edge is made of a strip of hardened steel or carbide that can withstand the forces of cutting tall stacks of material. The harder material inlaid in the blade also can stay sharper for much longer than the softer steels that makes up the majority of the blade.



Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Blades and Cutting Sticks > Many More Brands of Blades (Atlas to Wohlenberg, etc.) > Schneider Senator Blades > Model 92 (36")
Cutting, Trimming and Slitting > Blades and Cutting Sticks > Many More Brands of Blades (Atlas to Wohlenberg, etc.) > Schneider Senator Blades
Cutting, Trimming and Slitting > Blades and Cutting Sticks

Product price is not filled in. This product cannot be purchased.



G52740 - Hex Cap Screw DIN 933 5 X 18mm - Hohner Part #8705018 USD$1.30
Challenge Blade/44.500" LG x 5.000" WD x .431" TK/18 Holes/Model 37 TCM Challenger/Challenge Part #9-142-1/Standard Inlay/Each USD$498.75 Each
G39134 - Replaced By: G20313A - Deluxe Part #9463406
G12908 - Kit, Model 305, 1/2 Cr, 25 Wire, Thin Points - Deluxe Part #CBBB3000Q5 USD$294.00
G33113 - Allen Cap Screw: DIN 912: M5x35mm - Hohner Part #7905035 USD$3.40
G22301 - MBO Part # 205591040 - Perforating Blade/Split/22 Teeth/For 30mm Shaft/53mm OD x 35mm ID x 0.5mm TK USD$22.89
G44717 - Grease niple NIP A 2 - Hohner Part #4500009 USD$556.70
G33472 - Lever, Leg Length - Hohner Part #9465205 USD$79.40
G44852 - DO NOT USE - Retaining Washer for Shafts, see part# 5302300 - Hohner Part #53023002