Home >

High Capacity Shrink Tunnel PP4512-60
High Capacity Shrink Tunnel PP4512-60
 
Call for price


Product Code: G53909

Description
 
The Preferred Pack® PP4512-60 Shrink Tunnel with 45”W x 12”H x 60”L chamber
Features
The Preferred Pack® PP4512-60 Shrink Tunnel with 45”W x 12”H x 60”L chamber is a general purpose shrink tunnel that can be used for a wide variety of applications. Can be used with shrink bands, neck bands, full body sleeves, used with shrink film, used as drying or curing tunnel etc.

Highlights:
  • Fully Re-Circulating Air Chamber
  • Live Roller Rod Conveyor
  • Digital Temperature Control 0-400°
  • Adjustable Air Velocity Control
  • State-of-the-Art AC Variable Speed Drive 0-75 FPM
  • Chromed Conveyor Rollers and Shaft (No Rust)
  • Automatic Tunnel Cool Down with Shut Off
  • 1HP Blower Motor
  • Sealed Bearings on Drive and Idler Shafts
  • Chamber Size 45”W x 12”H x 60”L
  • Quietest Tunnel on the Market
  • Heats up to 300° F in less than 15 minutes
  • Thermal Overload Protection on All Motors
  • Locking Casters
  • Adjustable Leveling Pads 35” - 39.5”
  • Anti-Jam Safety Features on Conveyor
  • 15 kW Heater Bank
  • 2 year warranty
Options:
  • 16”, 20”, 24” or 28” Tunnel Height
  • Close Roller Spacing 1/2” Gap
  • Teflon Mesh Belt
  • Stainless Steel Metal Mesh Belt

Specifications:
G Code Model No. Chamber Size Speed Blower Motor Heater Bank Air Velocity Power
G53907 PP3612-60 36"W x 12"H x 60"L
 		0-75 FPM
 		Dual 1HP Dual 15kW Dual Controls
 		220V, 3Phase, 60 Amps
G53908 PP3620-96 36"W x 20"H x 96"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53909 PP4512-60 45"W x 12"H x 60"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53910 PP5520-72 55"W x 20"H x 72"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53911 PP6520-96 65"W x 20"H x 96"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps




Product price is not filled in. This product cannot be purchased.



G50643 - Torx socket head cap screw, 52/8S - Hohner Part #86032031 USD$7.60
Blade/Challenge/14.500" L x 2.750" W x .375" Tk/6 Holes/One of a Set of 3/HSS Inlay Only/Challenge Part #56248/Each USD$323.00 Each
G23960 - Tray Shield - Left - Deluxe Part #A1213 USD$72.90
G22181 - Clincher Operating Lever - Deluxe Part #19251 USD$218.00
G50907 - Box Cover, Fabricated/Bare Metal - Same as Challenge Part # A-8091 USD$99.00
G26447 - StitchMaster 230V, 50HZ - Deluxe Part #SM-CE25
G22720 - Stahl Part # 2007560800 - Perforating Blade/Split/8 Teeth/For 35mm Shaft/62mm OD x 40mm ID x 0.5mm TK/Each USD$14.50
G21535 - Block - Deluxe Part #123H10 USD$199.00
G12943 - Former & Driver 7/16 Cr, .060 X .024 Flat - Deluxe Part #CBBB83B USD$1,210.00