Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Table Slot Belting >

G53771 - Polar Cutter Slot Belt 221183, 70 mm wide
G53771 - Polar Cutter Slot Belt 221183, 70 mm wide
 
Our Price: USD$146.00


Product Code: G53771

Description
 
Slot covering tape or belt for Polar 92 CE and 92 CS paper cutters. This back gauge belt is only for Model 92 CE and CS cutters between machine serial numbers 4711001 and 5011700. This green belt is equivalent to, and a direct replacement for, the original Polar part number 221183. It is an aftermarket belt which is made from the same material as the original.
Features

Slot covering tape or belt for Polar 92 CE and 92 CS paper cutters. This back gauge belt is only for Model 92 CE and CS cutters between machine serial numbers 4711001 and 5011700. This green belt is equivalent to, and a direct replacement for, the original Polar part number 221183. It is an aftermarket belt which is made from the same material as the original.

Measures 70mm wide (2.75" wide) by 1.25mm thick (.050" thick). As shown in the photo, it includes the 3 punched mounting holes in one end. However, because of differing machining and casting thicknesses, the opposite end must be cut and punched to fit the individual machine. Extra length is supplied so that it can be cut to fit during assembly into the cutter.


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Table Slot Belting

Product price is not filled in. This product cannot be purchased.



G39405 - Stitcher Head Assembly - Loop, 25 Wire Only - Deluxe Part #DB75VHD231/2L USD$3,170.00
G49669 - Stitcher Head 5/16 Cr, 25 Rd Wire, Magnatek - Stallion - Deluxe Part #CAAA2004T14 USD$1,730.00
G25521 - Crank Arm - Deluxe Part #G40238B USD$175.00
G52046 - Replaced By: CB105 - Deluxe Part #A668
G39614 - Clincher Adjusting Bar - Deluxe Part #MG10065 USD$101.00
G25565 - Cutter Operating Cam - Deluxe Part #G40563 USD$73.50
Duplo Spacer - Duplo Part #98H-90931/Set of 4 USD$9.95
G41757 - Clutch/brake unit for HSB7.000 - Hohner Part #4200499 USD$10,776.80
G26298 - Terminal 1/4 x 90 - Deluxe Part #PG10219 USD$5.70