G39847 - S3A 7/8 Heavy Duty Machine

Home > Stitching & Bookletmaking > Deluxe Stitching > Deluxe Stitching Machines >

G39847 - S3A 7/8 Heavy Duty Machine - Deluxe Part #4301100

Our Price: USD$14,220.00

Product Code: G39847

Description

Technical Specs

For stitching up to 7/8" thick, flat or saddle stitching.

Features

Deluxe Model S3A 7/8" Stitching Machine - The two (2) Sheet to 7/8" Capacity Stitcher

The Deluxe S3A 7/8" performs like three stitchers in one. It's furnished with three sets of formers and drivers:

a set for #25 round wire (2 sheets to 1/4")
a set for #20 x #25 flat wire (1/4" to 1/2")*
a set for 19 x 21 1/2 flat wire (1/2" to 7/8"

As a result, the most particular customer will be pleased with perfect stitching on any job from two sheets to 7/8". The unit comes with saddle, flat table and gauges for flat and saddle stitching.

* Shipped with these parts installed.

Specifications:

Capacity: 2 sheets to 7/8" thick
Throat Depth: 12" Flat / 15" Saddle stitching
Crown Width: 7/16"
Wire Types: 25ga to 30ga round wire / 20ga x 24ga flat, 19ga x 21-1/2ga flat
Number of Heads Available: 1
Max Number of Heads: 1
Floor Space: 27-1/2" x 27"
Motor: 1/3hp 115VAC 60hz single phase
Net Weight: 382lbs
Shipping Weight: 457lbs

Browse for more products in the same category as this item:

Stitching & Bookletmaking > Deluxe Stitching > Deluxe Stitching Machines
Stitching & Bookletmaking

	G39456 - Clincher Cylinder - Deluxe Part #ESA-1538-4 USD$938.00
	G14732 - Knife Belt - Deluxe Part #RBM1211F USD$71.80
	G12434 - Nut 1/4-20 - Deluxe Part #CB493 USD$2.05
	G26269 - Wood Shipping Pallet - 30X35 - Deluxe Part #PC121 USD$150.00
	G33459 - Guide Bearing, Short 52/8 - Hohner Part #9463803 USD$187.20
	G24481 - Clutch Throw Off, S2F, S3A-7/8 & 1-1/8 - Deluxe Part #D30199F USD$195.00
	G13700 - Stitch Head, Magnatek Loop - Deluxe Part #CTTT2604F5 USD$1,530.00
	Plastrix/XTC Matrix - 0.4mm X 0.6mm/0.016" X 0.024"(1624) - Center Type USD$75.20
	G23099 - Wire Feed Drive Gear - Deluxe Part #80H2 USD$546.00