Home >

High Capacity Shrink Tunnel PP4512-60
High Capacity Shrink Tunnel PP4512-60
 
Call for price


Product Code: G53909

Description
 
The Preferred Pack® PP4512-60 Shrink Tunnel with 45”W x 12”H x 60”L chamber
Features
The Preferred Pack® PP4512-60 Shrink Tunnel with 45”W x 12”H x 60”L chamber is a general purpose shrink tunnel that can be used for a wide variety of applications. Can be used with shrink bands, neck bands, full body sleeves, used with shrink film, used as drying or curing tunnel etc.

Highlights:
  • Fully Re-Circulating Air Chamber
  • Live Roller Rod Conveyor
  • Digital Temperature Control 0-400°
  • Adjustable Air Velocity Control
  • State-of-the-Art AC Variable Speed Drive 0-75 FPM
  • Chromed Conveyor Rollers and Shaft (No Rust)
  • Automatic Tunnel Cool Down with Shut Off
  • 1HP Blower Motor
  • Sealed Bearings on Drive and Idler Shafts
  • Chamber Size 45”W x 12”H x 60”L
  • Quietest Tunnel on the Market
  • Heats up to 300° F in less than 15 minutes
  • Thermal Overload Protection on All Motors
  • Locking Casters
  • Adjustable Leveling Pads 35” - 39.5”
  • Anti-Jam Safety Features on Conveyor
  • 15 kW Heater Bank
  • 2 year warranty
Options:
  • 16”, 20”, 24” or 28” Tunnel Height
  • Close Roller Spacing 1/2” Gap
  • Teflon Mesh Belt
  • Stainless Steel Metal Mesh Belt

Specifications:
G Code Model No. Chamber Size Speed Blower Motor Heater Bank Air Velocity Power
G53907 PP3612-60 36"W x 12"H x 60"L
 		0-75 FPM
 		Dual 1HP Dual 15kW Dual Controls
 		220V, 3Phase, 60 Amps
G53908 PP3620-96 36"W x 20"H x 96"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53909 PP4512-60 45"W x 12"H x 60"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53910 PP5520-72 55"W x 20"H x 72"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps
G53911 PP6520-96 65"W x 20"H x 96"L
 		0-75 FPM Dual 1HP Dual 15kW Dual Controls 220V, 3Phase, 75 Amps




Product price is not filled in. This product cannot be purchased.



Wire-O Binding [9/16", Gold, 32 Loop 3:1 Pitch] Box 100 USD$43.06
G21487 - Former LH 1-1/4 - Deluxe Part #116H216 USD$352.00
G33157 - Allen set screw: DIN 913: M5x30mm - Hohner Part #8005030 USD$3.10
“All-in-One” L-Sealer with Shrink Chamber 76STC Call for price
G21887 - Wire Guide Spring Stud - Deluxe Part #18152 USD$5.00
G50255 - Bolt, M45/6 (SN 878 and up) - Hohner Part #3155558 USD$72.50
G26406 - Replaced By: CR0029 - Deluxe Part #S12-00-0288
G49683 - Wire Feed Gear, S2F - 15 ga round wire - Deluxe Part #CD2347L USD$332.00
G52437 - Arm Stitcher, 7/16 Cr, 16 inch Throat, (.103X.020 Wire) 115VAC/60Hz - Electric Trip - Deluxe Part #HF16A-AST-ET USD$8,050.00