Home > Stitching & Bookletmaking > Deluxe Stitching > Deluxe Stitching Machines >

G39847 - S3A 7/8 Heavy Duty Machine - Deluxe Part #4301100
G39847 - S3A 7/8 Heavy Duty Machine - Deluxe Part #4301100
 
Our Price: USD$14,220.00


Product Code: G39847

Description Technical Specs
 
For stitching up to 7/8" thick, flat or saddle stitching.
Features

Deluxe Model S3A 7/8" Stitching Machine - The two (2) Sheet to 7/8" Capacity Stitcher

The Deluxe S3A 7/8" performs like three stitchers in one. It's furnished with three sets of formers and drivers:
  • a set for #25 round wire (2 sheets to 1/4")
  • a set for #20 x #25 flat wire (1/4" to 1/2")*
  • a set for 19 x 21 1/2 flat wire (1/2" to 7/8"

As a result, the most particular customer will be pleased with perfect stitching on any job from two sheets to 7/8". The unit comes with saddle, flat table and gauges for flat and saddle stitching.

* Shipped with these parts installed.

Specifications:
  • Capacity: 2 sheets to 7/8" thick
  • Throat Depth: 12" Flat / 15" Saddle stitching
  • Crown Width: 7/16"
  • Wire Types: 25ga to 30ga round wire / 20ga x 24ga flat, 19ga x 21-1/2ga flat
  • Number of Heads Available: 1
  • Max Number of Heads: 1
  • Floor Space: 27-1/2" x 27"
  • Motor: 1/3hp 115VAC 60hz single phase
  • Net Weight: 382lbs
  • Shipping Weight: 457lbs


Browse for more products in the same category as this item:

Stitching & Bookletmaking > Deluxe Stitching > Deluxe Stitching Machines
Stitching & Bookletmaking

Product price is not filled in. This product cannot be purchased.



G11321 - Replaced By: CA9012A - Deluxe Part #9012MATL
G52503 - Control Rod - Hohner Part #3244208 USD$137.10
G13012 - Arm Key, Oscillating 16 FT - Deluxe Part #CD1766 USD$42.80
Plastrix/XTC Matrix - 0.5mm X 1.5mm/0.020" X 0.060"(2060) - Center Type USD$75.20
G50592 - Shoe Tongue Curve,LH M45/6 SN 878 and up - Hohner Part #3155551 USD$95.40
G12065 - Washer 5/16, 5/64 Thick - Deluxe Part #CB175 USD$2.30