Home >

G44042 - Replaced By: HF16A-AST-1-1/4CR (for 110VAC) or HF16A-BST-1-1/4CR (for 220VAC) - Deluxe Part #4506003
G44042 - Replaced By: HF16A-AST-1-1/4CR (for 110VAC) or HF16A-BST-1-1/4CR (for 220VAC) - Deluxe Part #4506003
 
Minimum Order Requirements of $50

Product price is not filled in. This product cannot be purchased.


Product Code: G44042

Description
 
G44042 - Replaced By: HF16A-AST-1-1/4CR (for 110VAC) or HF16A-BST-1-1/4CR (for 220VAC) - Deluxe Part #4506003
Features

HF16A SPECIFICATION:

Distance from Front of Frame to Clincher - 16" [41cm]

Distance from Top of Base to Clincher - 41.5" [105cm]

Maximum Size Box Handled (Including Top Flaps) - 32" [81cm] Width

Maximum Size Box Handled (Including Top Flaps) - 41.25" [105cm] Depth

Standard Crown Stitch Size - 7/16" [11mm]

Optional Crown Stitch Size - 1.25" [32mm]

Wire Sizes available - .103x.014 / .103x.017 / .103x.020

[2.6mm x .4mm / 2.6mm x .45mm / 2.6mm x .5mm]

Coil Capacity - 25 lb [11kg]

Stitches per minute - 250

Trip Mechanism - Mechanical, optional Electric, foot operated

Motor - 1/3 HP, 1725 RPM, 115V/60Hz/AC , Single Phase

Dimensions (W x D x H) - 40" x 48" x 78" [102cm x 122cm x 198cm]

Approximate Shipping Weight (lb) - 515 [234kg]



Spiral Plastic Coil 4:1 12" [50 mm (2"), White] Box 100 USD$120.32
G31812 - DO NOT USE - Spring Bridge, 43/6 NEW# 3164022 - Hohner Part #3164017
G51105 - Hydraulic Knife Cylinder - Rebuilt w/Core Exchange - Same as Challenge #A-8420-2 USD$750.00 ($700 plus $500 Refundable Core Chg)
G41162 - Drive Shaft - Deluxe Part #RBM1544F USD$76.80
G12728 - Cam & Shaft Assembly, S5A25 Mechanical - Deluxe Part #CBB107V2 USD$1,020.00
G51818 - Universal Paper Drill Bit Sharpener USD$90.72 Each
G52594 - Front Plate, stitcher - Hohner Part #3340352 USD$519.50
G32924 - "E" Clip: DIN 6799: 6mm - Hohner Part #5306000 USD$1.50
G12303 - Screw, Round Head - Deluxe Part #CB287E USD$2.40