Home > Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products >

Channel Matrix - Size 50 - Center Type - White - Box of 32 Pieces - No longer available please see alternate possibility G34083 described below.
Channel Matrix - Size 50 - Center Type - White - Box of 32 Pieces - No longer available please see alternate possibility G34083 described below.
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34083.
Our Price: USD$75.20


Product Code: G51811

Description Technical Specs
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34083.
Features
  • Our metal backed Matrix is extruded right onto the perforated steel backing, allowing the plastic to penetrate the steel and give it a stronger bond.
  • It is also extruded with a slight taper to the edges.
  • Good for hand fed presses and cylinder presses since the metal back retains its rigidity when working on a cylinder that may be worn.
  • Less expensive than the Mylar base counterparts.
  • Generally a short to medium run length matrix.
  • Color coded for quick identification of channel size.


Browse for more products in the same category as this item:

Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart

Product price is not filled in. This product cannot be purchased.



G31525 - Former Nose, 55/7FR - Hohner Part #3151413 USD$146.20
G32153 - Pin, bender linkage - Hohner Part #3241214 USD$1,720.30
Challenge Blade/44.500" LG x 5.000" WD x .431" TK/18 Holes/Model 37 TCM Challenger/Challenge Part #9-142-1/Standard Inlay/Each USD$498.75 Each
G36921 - PUSHBUTTON SWITCH GREEN - Challenge Part Number E-1045-8 USD$33.95
G24238 - Oilite Bushing - Deluxe Part #B1620-8 USD$9.60
Spiral Plastic Coil 4:1 12" [32 mm (1-1/4"), Black] Box 100 USD$58.94
G21807 - Work Table Bushing - Deluxe Part #17153 USD$25.20
G22721 - Replaced By: G20558 - Deluxe Part #3767310
G13846 - Face Plate Assembly, S3A - Deluxe Part #D30193A USD$1,795.50