Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Gearbox, Flywheel And Pull Arm Area Parts > Pull Arm Guides >

G16007 - Guide Shaft for Pull Arm in Polar 115 EL & 115 EMC Paper Cutters
G16007 - Guide Shaft for Pull Arm in Polar 115 EL & 115 EMC Paper Cutters
 
Our Price: USD$115.00


Availability:: Usually Ships in 24 Hours
Product Code: G16007

Description
 
G16007 - Guide Shaft for Pull Arm in Polar 115 EL & 115 EMC Paper Cutters
Features

Guide shaft or guide rod for the center of the pull arm on early Polar 115 CE and 115 EL cutters, built before machine serial number 4731747. These early Polar 115 EL and 115 CE are the ones that use 2 shear bolts in the pull arm and use a roll pin to secure the bottom of the guide rode in place.

If your pull arm uses a set screw to mount the guide rod in place then see our part number G16005

The later 115 EMC 2 cutters (after about 1984) have a single center shear bolt and use our part number G16008

This 14mm diameter alignment rod fits up the middle of the pull arm to prevent it from flapping around and causing damage when the shear bolt breaks. It is made from centerless ground drill rod for maximum toughness. Overall length is approximately 15" long. (original Polar part number 207463 or 218649)


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Gearbox, Flywheel And Pull Arm Area Parts > Pull Arm Guides


Pump Rebuild Kit, DCLF-40-DV/Elmo Rietschle Part #3011 USD$1,746.09
G32308 - Adjustment screw, SN up to 70391 (Old # - Hohner Part #3267164 USD$34.40
G50193 - Hot Melt Adhesive Book Binding Glue/Modified EVA/Opaque Chips/Per 50-lb. Box USD$536.00
G13879 - Clincher Bar Spring - Deluxe Part #D30481F USD$14.70
G40097 - Guiding Bracket, SB50 - Hohner Part #3159097 USD$175.10
G51004 - Hydraulic Clamp Cylinder - Rebuilt w/Core Exchange - Same as Challenge #A-8411 USD$750.00 ($600 plus $300 Refundable Core Chg)
G44369 - Spindle bolt - Hohner Part #3203306 USD$177.70
G22874 - Supporter Spring Stud - Deluxe Part #7099 USD$6.20
G53754 - Slot covering green belt (Polar 222178) USD$146.00