G11192 - Replaced By: HF16A-AST (for 110VAC) or HF16A-BST (for 220VAC)

Home > Stitching & Bookletmaking > Deluxe Stitching > Deluxe Stitching Parts >

G11192 - Replaced By: HF16A-AST (for 110VAC) or HF16A-BST (for 220VAC) - Deluxe Part #4506000

Minimum Order Requirements of $50

Product price is not filled in. This product cannot be purchased.

Product Code: G11192

Description

G11192 - Replaced By: HF16A-AST (for 110VAC) or HF16A-BST (for 220VAC) - Deluxe Part #4506000

Features

HF16A SPECIFICATION:

Distance from Front of Frame to Clincher - 16" [41cm]

Distance from Top of Base to Clincher - 41.5" [105cm]

Maximum Size Box Handled (Including Top Flaps) - 32" [81cm] Width

Maximum Size Box Handled (Including Top Flaps) - 41.25" [105cm] Depth

Standard Crown Stitch Size - 7/16" [11mm]

Optional Crown Stitch Size - 1.25" [32mm]

Wire Sizes available - .103x.014 / .103x.017 / .103x.020

[2.6mm x .4mm / 2.6mm x .45mm / 2.6mm x .5mm]

Coil Capacity - 25 lb [11kg]

Stitches per minute - 250

Trip Mechanism - Mechanical, optional Electric, foot operated

Motor - 1/3 HP, 1725 RPM, 115V/60Hz/AC , Single Phase

Dimensions (W x D x H) - 40" x 48" x 78" [102cm x 122cm x 198cm]

Approximate Shipping Weight (lb) - 515 [234kg]

Browse for more products in the same category as this item:

Product price is not filled in. This product cannot be purchased.

	G41010 - Replaced By: H070550-24 - Deluxe Part #3159324
	G22183 - Clincher Operating Lever Pivot - Deluxe Part #19254 USD$73.20
	G48916 - Bender Bar/Driver Assembly, 20X24 Flat Wire - Deluxe Part #G20377BAA USD$588.00
	G32824 - One way bearing, RH - Hohner Part #4400076 USD$567.80
	G31438 - Gripper anvil, LH - Hohner Part #3134562 USD$170.30
	G24259 - Gripper Bar Clamp - Deluxe Part #BF51 USD$14.40
	G52644 - Spring Washer, DIN 2093: 8 x 4 x 0.5 - Hohner Part #4010851
	G14062 - Mandrel, N3B - Deluxe Part #D31884F USD$714.00
	G23652 - Replaced By: 9098C - Deluxe Part #9196