Home > Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products >

G38115 - Channel Creasing Matrix - Size 90 - Red - Center Type
G38115 - Channel Creasing Matrix - Size 90 - Red - Center Type
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34072.
Our Price: USD$75.20


Product Code: G38115

Description Technical Specs
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34072.
Features
  • Our metal backed Matrix is extruded right onto the perforated steel backing, allowing the plastic to penetrate the steel and give it a stronger bond.
  • It is also extruded with a slight taper to the edges.
  • Good for hand fed presses and cylinder presses since the metal back retains its rigidity when working on a cylinder that may be worn.
  • Less expensive than the Mylar base counterparts.
  • Generally a short to medium run length matrix.
  • Color coded for quick identification of channel size.


Browse for more products in the same category as this item:

Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart


Muller-Martini Blade/14.173" L x 1.575" W x .590" Tk/Bottom left side/890.0539.3/Standard Inlaid/Each USD$194.75 Each
Spiral Plastic Coil 4:1 36" [8 mm (5/16"), White] Box 100 USD$30.48
G52659 - Exact Motor, 230V 3PH 50/60cycle - Hohner Part #4200135 USD$4,312.90
G13845 - Front Bell Crank, S3A - Deluxe Part #D30192F USD$153.00
G51607 - Bearing, feed wheel - Hohner Part #4418022 USD$28.20
G12943 - Former & Driver 7/16 Cr, .060 X .024 Flat - Deluxe Part #CBBB83B USD$1,210.00
G26311 - Stitching Wire/Round/25 Gauge/On 5 lb. Spool/Tinned Finish/Per Spool USD$18.77 Per Spool
G21113 - Limit Stop, DB45 (Replaces 0305.2032.4) - Deluxe Part #047010 USD$24.50
G49000 - Driver 1/2 Cr, 22 Rd Wire - Deluxe Part #CA9009D USD$120.00