Slot covering green belt (Polar 222178)

Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Table Slot Belting >

G53754 - Slot covering green belt (Polar 222178)

Our Price: USD$146.00

Product Code: G53754

Description

Slot covering tape or belt for some of the Polar 115 CS, Polar 115 CE, and Polar 115 EMC I guillotine paper cutters. This ONLY fits between machine serial numbers 4831001 to 4831804, and for Polar 115 EMC cutters between machine serial numbers 4836001 to 4836040. These cutters were built only in approximately 1978.

Features

This green backgauge table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 222178. It is an aftermarket belt which is made from the same material as the original.

It measures 60 mm wide (2 3/8 inches wide) by 1.25mm thick (.050 inches thick). As shown in the photo, both ends have the mounting slots and holes cut out.

This style of belt does not have the center "V" guide on the bottom side.

Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Table Slot Belting

Product price is not filled in. This product cannot be purchased.

	G25544 - Supporter Guide Plate - Deluxe Part #G40513B USD$84.20
	Spiral Plastic Coil 5:1 36" [8 mm (5/16"), White] Box 100 USD$36.37
	Wire-O Binding [3/4", Black, 21 Loop 2:1 Pitch] Box 50 USD$24.91
	G52262 - DO NOT USE- See Part No. 9465402 - Hohner Part #6465402
	G12062 - Nut, 7/16-14 - Deluxe Part #CB172 USD$2.40
	G12697 - Set Screw 5/16-18 X 1 - Deluxe Part #CB890 USD$2.75
	G41732 - Wing Screw Head - Hohner Part #4100050 USD$64.30
	G55199 - Baumfolder 1-1/8" Slitter Shaft Pull Out Tires/Set of 8 - Baumfolder Part #10347 USD$5.00
	G52028 - Replaced By: CB240 - Deluxe Part #A-1111