Home >

G44042 - Replaced By: HF16A-AST-1-1/4CR (for 110VAC) or HF16A-BST-1-1/4CR (for 220VAC) - Deluxe Part #4506003
G44042 - Replaced By: HF16A-AST-1-1/4CR (for 110VAC) or HF16A-BST-1-1/4CR (for 220VAC) - Deluxe Part #4506003
 
Minimum Order Requirements of $50

Product price is not filled in. This product cannot be purchased.


Product Code: G44042

Description
 
G44042 - Replaced By: HF16A-AST-1-1/4CR (for 110VAC) or HF16A-BST-1-1/4CR (for 220VAC) - Deluxe Part #4506003
Features

HF16A SPECIFICATION:

Distance from Front of Frame to Clincher - 16" [41cm]

Distance from Top of Base to Clincher - 41.5" [105cm]

Maximum Size Box Handled (Including Top Flaps) - 32" [81cm] Width

Maximum Size Box Handled (Including Top Flaps) - 41.25" [105cm] Depth

Standard Crown Stitch Size - 7/16" [11mm]

Optional Crown Stitch Size - 1.25" [32mm]

Wire Sizes available - .103x.014 / .103x.017 / .103x.020

[2.6mm x .4mm / 2.6mm x .45mm / 2.6mm x .5mm]

Coil Capacity - 25 lb [11kg]

Stitches per minute - 250

Trip Mechanism - Mechanical, optional Electric, foot operated

Motor - 1/3 HP, 1725 RPM, 115V/60Hz/AC , Single Phase

Dimensions (W x D x H) - 40" x 48" x 78" [102cm x 122cm x 198cm]

Approximate Shipping Weight (lb) - 515 [234kg]

Product price is not filled in. This product cannot be purchased.



G11192 - Replaced By: HF16A-AST (for 110VAC) or HF16A-BST (for 220VAC) - Deluxe Part #4506000
G21116 - Wire Holder Hook Assembly, DB45 (Replaces 0305.2050.4) - Deluxe Part #047013A USD$76.00
G44551 - Guide Plate - Hohner Part #3764086 USD$13.40
G53732 - Toothed Plate - Same as 420413 USD$249.00
G32285 - Knife Round - Hohner Part #3265210 USD$32.50
G32373 - Clamp mounting - Hohner Part #3463010 USD$164.70
G32365 - Boot tongue - Hohner Part #3403552 USD$576.20
G12780 - Wire Straightener Adj Slide Assy, CBBB209A - Deluxe Part #CBB236A USD$202.00
G31689 - Clincher Box, Stationary M50/8 New # 3155535 - Hohner Part #3159416