G11192 - Replaced By: HF16A-AST (for 110VAC) or HF16A-BST (for 220VAC)

Home > Stitching & Bookletmaking > Deluxe Stitching > Deluxe Stitching Parts >

G11192 - Replaced By: HF16A-AST (for 110VAC) or HF16A-BST (for 220VAC) - Deluxe Part #4506000

Minimum Order Requirements of $50

Product price is not filled in. This product cannot be purchased.

Product Code: G11192

Description

G11192 - Replaced By: HF16A-AST (for 110VAC) or HF16A-BST (for 220VAC) - Deluxe Part #4506000

Features

HF16A SPECIFICATION:

Distance from Front of Frame to Clincher - 16" [41cm]

Distance from Top of Base to Clincher - 41.5" [105cm]

Maximum Size Box Handled (Including Top Flaps) - 32" [81cm] Width

Maximum Size Box Handled (Including Top Flaps) - 41.25" [105cm] Depth

Standard Crown Stitch Size - 7/16" [11mm]

Optional Crown Stitch Size - 1.25" [32mm]

Wire Sizes available - .103x.014 / .103x.017 / .103x.020

[2.6mm x .4mm / 2.6mm x .45mm / 2.6mm x .5mm]

Coil Capacity - 25 lb [11kg]

Stitches per minute - 250

Trip Mechanism - Mechanical, optional Electric, foot operated

Motor - 1/3 HP, 1725 RPM, 115V/60Hz/AC , Single Phase

Dimensions (W x D x H) - 40" x 48" x 78" [102cm x 122cm x 198cm]

Approximate Shipping Weight (lb) - 515 [234kg]

Browse for more products in the same category as this item:

Product price is not filled in. This product cannot be purchased.

	G33242 - Washer, KU M8 DIN 9021 - Hohner Part #9200014 USD$3.20
	G40310 - Saddle Paper Lead-In, Single Head - Deluxe Part #ESA-1556-10 USD$93.60
	G23977 - Auto/Jog Switch - Deluxe Part #A1227 USD$34.70
	G12353 - Clincher Block 7/16 Cr - 40 & 54 inch - Deluxe Part #CB361L USD$451.00
	G32811 - Pin-axial ball bearing NKX 30 - Hohner Part #4400034 USD$1,073.80
	G48885 - Double End Former 17ga Wire - 5mm Cr - Deluxe Part #D60817F-5mm USD$620.00
	G24062 - Replaced By: CB93 - Deluxe Part #A309E
	G44581 - Housing, 70/20 - Hohner Part #3167008 USD$1,581.70
	G52260 - Foldnak 2.5MM Drill Bit.. - Hohner Part #6371025 USD$86.00