Home > Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products >

G38115 - Channel Creasing Matrix - Size 90 - Red - Center Type
G38115 - Channel Creasing Matrix - Size 90 - Red - Center Type
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34072.
Our Price: USD$75.20


Product Code: G38115

Description Technical Specs
 
Matrix is being phased out and will be replaced by Plastrix. For a good crossover in Plastrix, please see G34072.
Features
  • Our metal backed Matrix is extruded right onto the perforated steel backing, allowing the plastic to penetrate the steel and give it a stronger bond.
  • It is also extruded with a slight taper to the edges.
  • Good for hand fed presses and cylinder presses since the metal back retains its rigidity when working on a cylinder that may be worn.
  • Less expensive than the Mylar base counterparts.
  • Generally a short to medium run length matrix.
  • Color coded for quick identification of channel size.


Browse for more products in the same category as this item:

Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart > Channnel Metal Backed Creasing Matrix Products
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix
Die Cutting and Letterpress > Die Cutting And Letterpress Parts And Supplies > Creasing Matrix & Plastrix > Channnel Metal Backed Creasing Matrix Chart


G32710 - Magnetic Coil MSG-24 #3599 24VDC - Hohner Part #4200064 USD$581.90
Duplo Electronic Stapler Refill Cartridge/5000 Staples per Cartridge/Same as Duplo part #025-10163/Per Cartidge USD$19.95
G23952 - Lower Side Panel - Right - Deluxe Part #A1207 USD$291.00
G32286 - Pin, Roller - Cutter Box - REPLACED by part # 3267218
G33369 - Center Pusher, Accord 25/40 - Hohner Part #9441507 USD$562.40
G31701 - Former Nose, M50/8 6mm Loop - Hohner Part #3159477 USD$128.00
G44128 - Motor, 1/2 HP,1 PH, 50 HZ - Deluxe Part #M3X2 USD$1,320.00
G14633 - Butt Connector - 18-22 ga wire - Deluxe Part #P7922 USD$1.70
G31921 - Lever, wire transport on / off - Hohner Part #3167186 USD$17.40