Home >

G44042 - Replaced By: HF16A-AST-1-1/4CR (for 110VAC) or HF16A-BST-1-1/4CR (for 220VAC) - Deluxe Part #4506003
G44042 - Replaced By: HF16A-AST-1-1/4CR (for 110VAC) or HF16A-BST-1-1/4CR (for 220VAC) - Deluxe Part #4506003
 
Minimum Order Requirements of $50

Product price is not filled in. This product cannot be purchased.


Product Code: G44042

Description
 
G44042 - Replaced By: HF16A-AST-1-1/4CR (for 110VAC) or HF16A-BST-1-1/4CR (for 220VAC) - Deluxe Part #4506003
Features

HF16A SPECIFICATION:

Distance from Front of Frame to Clincher - 16" [41cm]

Distance from Top of Base to Clincher - 41.5" [105cm]

Maximum Size Box Handled (Including Top Flaps) - 32" [81cm] Width

Maximum Size Box Handled (Including Top Flaps) - 41.25" [105cm] Depth

Standard Crown Stitch Size - 7/16" [11mm]

Optional Crown Stitch Size - 1.25" [32mm]

Wire Sizes available - .103x.014 / .103x.017 / .103x.020

[2.6mm x .4mm / 2.6mm x .45mm / 2.6mm x .5mm]

Coil Capacity - 25 lb [11kg]

Stitches per minute - 250

Trip Mechanism - Mechanical, optional Electric, foot operated

Motor - 1/3 HP, 1725 RPM, 115V/60Hz/AC , Single Phase

Dimensions (W x D x H) - 40" x 48" x 78" [102cm x 122cm x 198cm]

Approximate Shipping Weight (lb) - 515 [234kg]

Product price is not filled in. This product cannot be purchased.



G25759 - Dowel Pin M4x16 - Deluxe Part #G50149 USD$1.45
G24323 - Clincher Plate, Pass-by - Deluxe Part #C94 USD$49.70
G26340 - Washer 9/16 - Deluxe Part #PG10271 USD$1.25
G32513 - Finger guard, Economy 25/40 - Hohner Part #3735553 USD$278.50
G53640 - Stößelschraube -E- - Hohner Part #3165926 USD$42.70
G49091 - Replaced By: SP20880 - Deluxe Part #FS25-166
G32751 - Transformer, 110V # 399 w/ Rectifier - Hohner Part #4300072 USD$493.70
G25091 - Feed Rack Adjustment Knob - Deluxe Part #G20573 USD$12.50
G52491 - Bender Insert N-12, left 3M - Hohner Part #3166979 USD$402.00