Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Table Slot Belting >

G53756 - Slot covering green belt, for Polar 137 (Polar 242588)
G53756 - Slot covering green belt, for Polar 137 (Polar 242588)
 
Our Price: USD$238.00


Product Code: G53756

Description
 
Slot covering belt or tape for Polar 137 S, Polar 137 SD, Polar 137 SDP, Polar 137 EM, Polar 137 EMC II, and Polar 137 EMC-MON paper cutters, after machine serial number 5541001 up to serial number 6441239. This green table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 242588 or Polar ZA3.242588. It is an aftermarket belt which is the same size as, and made from the same material as the original. It contains the center "V" guide which is fused to the belt.
Features
Slot covering belt or tape for Polar 137 S, Polar 137 SD, Polar 137 SDP, Polar 137 EM, Polar 137 EMC II, and Polar 137 EMC-MON paper cutters, after machine serial number 5541001 up to serial number 6441239. This green table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 242588 or Polar ZA3.242588. It is an aftermarket belt which is the same size as, and made from the same material as the original. It contains the center "V" guide which is fused to the belt.

For the Polar 137 EMC, BEFORE serial number 5541001, (without the bottom "V" guide), see our part number G53757
Measures 60 mm wide (2 3/8 inches wide) by 1.25mm thick (.050 inches thick). The cogged center "V" guide is 10 mm wide. As shown in the photo, both ends of this backgauge belt have the mounting slots and holes cut out.


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Table Slot Belting

Product price is not filled in. This product cannot be purchased.

Product price is not filled in. This product cannot be purchased.



G33465 - Eccentric Stop, 43/6 - Hohner Part #9464125 USD$22.20
G31983 - Pin for latch - Hohner Part #3203246 USD$36.00
G22501 - Replaced By: CT2608 - Deluxe Part #2608
G53701 - Driver Bearing HSB 10000 Chain - Hohner Part #9982048 USD$134.51
G48138 - Cutter Box - 52/8M - Hohner Part #9963865 USD$2,053.00
G33145 - Allen set screw: DIN 913: M4x16mm - Hohner Part #8004016 USD$1.30
G32345 - DO NOT USE - SEE PART #3155151
G32191 - Screw, Pan Head Loop Stitch - Hohner Part #3251421 USD$11.50
G21365 - Replaced By: 077022 - Deluxe Part #0881.0315.4