Home >

False Clamp - 78 Size Polar Models - Narrow Width For Business Cards
False Clamp - 78 Size Polar Models - Narrow Width For Business Cards
Regular width model shown in photo
  
Our Price: USD$850.00


Availability:: Usually Ships in 1 to 2 Weeks
Product Code: G36102

Description
 
G36102 - Narrow with False Clamp (approx. 1.9" wide) for business cards. With a 10mm distance from edge of plate to center of pin**See Important note below!!
Features
Fits on 78 ES, ED, X, XT

This is our business card version which is approximately 1.9" wide so it is narrow enough for cutting business cards. The machine can tell which false clamp you have installed by the height of the third pin and these include the pin for a narrow version. This permits the backgauge to run up to the plate.

**IMPORTANT NOTE!!!: There are at least two versions of False Clamp pin configurations for this size of cutter, and we cannot tell which type you have from your serial number. .
The major difference between them is the distance of the center of the mounting pins to the blade-side edge of the plate; with one measuring 14mm (approx. 9/16") which is our Product #G36103 The other is 10mm (approx. 3/8") from the edge, is our Product # G36102 and you are currently on it's product page.



What we can do to confirm which one you have is ship you two miniature Test False Clamps that we have made and then you can tell us which one fits your cutter. We will contact you if you purchase this False Clamp to give you this option if you cannot measure the distance of the holes on your clamp yourself. DO NOT CYCLE THE BLADE WITH THE TEST FALSE CLAMP IN YOUR MACHINE!!

ORDERING INSTRUCTIONS:
Purchase a False Clamp model of your preferred width but in either pin configuration and if you happen to have the other type of pin distance we will adjust the product number on your order.

*Note: More False Clamps for other Polar Cutter sizes may not be on this website but may also be available - Please call to inquire.

These are typically made to order and have a 1 to 2 week lead time. Check with us for current stock.
Note: We can repair False Clamps that have broken or bent pins. Call us for pricing at 1-877-22GODAR.

Product price is not filled in. This product cannot be purchased.



Sealing Bands 3" X 14" Paper Bands 60# Brown/5M per Case Please contact us for pricing
G26513 - Screw 1/4-20x3/8 - Deluxe Part #UA3806.16 USD$1.00
G26154 - Clincher Arm Clamp Rod - Deluxe Part #MG10076 USD$26.60
G44723 - Switch box - Hohner Part #4300063 USD$186.60
G40175 - Coupling shaft - Hohner Part #3203378 USD$2,595.80
G23100 - Wire Feed Drive Gear - Deluxe Part #80H4 USD$880.00
G11441 - Microswitch, Bookletmate - Deluxe Part #BMT9
G14045 - Nut, N3B - Deluxe Part #D31836F USD$182.00
G50372 - Eccentric Bolt, 52/8S - Hohner Part #3167239 USD$112.40