Home > Cutting, Trimming and Slitting > Paper Cutter Parts & Supplies > Challenge Cutter Parts & Supplies > Challenge Machine Parts >

G26686 - Vickers / Eaton Valve for Challenge Cutter/One (1) Knife Valve
G26686 - Vickers / Eaton Valve for Challenge Cutter/One (1) Knife Valve
 
Challenge Machinery Co. issued a safety bulletin concerning some of their cutters which includes Diamond serial #s 101-2864, and Champion MC, MCPB, MPX, MPC, CRT serial #s 11197-13906 & 91010-94131D using Parker directional valves which can fail during use and cause serious injury.

Here purchase one set of both a knife valve and clamp valve, as both should be replaced or else it is highly recommended to retire the cutter: For the complete set, see Part #G26685, or for clamp valve see Part #G26687
.
Our Price: USD$1,350.00


Product Code: G26686

Description Technical Specs Extended Information
 
G26685 - Vickers / Eaton Valve for Challenge Cutter/One (1) Knife Valve
Features

SAFETY BULLETIN:
CHALLENGE MACHINERY HAS ISSUED A SAFETY BULLETIN CONCERNING THEIR CUTTERS THAT INCLUDE THE FOLLOWING:

DIAMOND SERIES - SN: 101 - 2864
CHAMPION MC, MCPB, MPX, MPC, CRT - SN: 11197 - 13906 & SN: 91010 - 94131D

ALL OF THESE CUTTERS HAVE PARKER DIRECTIONAL VALVES THAT CAN FAIL DURING USE. THESE VALVES ARE LOCATED IN THE BOTTOM OF YOUR MACHINE IN THE MIDDLE. THE PARKER VALVES ARE VERY EASY TO IDENTIFY. THERE IS (1) FOR THE KNIFE AND (1) FOR THE CLAMP. THESE VALVES LOOK THE SAME, BUT WORK DIFFERENTLY IN OPERATION. IF THE VALVE FAILS DURING OPERATION, THE KNIFE OR THE CLAMP CAN COME CRASHING DOWN UNEXPECTEDLY, EVEN WITHOUT YOUR FINGERS ON THE CUT BUTTONS, WHICH CAN CAUSE A SIGNIFICANT INJURY TO YOUR OPERATOR.

We have valves to replace the failing Parker valves.
The new valves are manufactured by VICKERS/EATON. Theses valves are Direct Replacement valves for the Parker valves. The valves come ready to install and can be done by anyone who is somewhat mechanical. Step-by-step instructions are included, as well as phone support from OBSOLETE CUTTER PARTS.


We encourage you to take some kind of action to prevent any injuries.

The current list price on these replacement valves is $1500.00.

These valves are now on sale for $1350.00/ea - $2700.00 for the set.

You can replace just one valve, but we strongly recommend that both the Knife and the Clamp valve be replaced.

YOU NEED TO TAKE SOME ACTION TO PREVENT A MAJOR INJURY.
If replacing the valves is not an option, maybe replacing the cutter is the way to go. We can help you find a good NEW or USED Cutter.



Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts & Supplies > Challenge Cutter Parts & Supplies > Challenge Machine Parts