 |
 |
 |
 |
|
 |
|
Features
This aftermarket scale is made from 5/8" wide spring steel, the same as on the originals. The overall length is 101-1/2" and the length between the center of the end grommets is 100-7/8". The holes in the brass end grommets for the spring are 1/4" in diameter. The mounting
slot measures 1/4" wide x 3/4" long. This tape measure fits most of the Challenge 30.5" Style H cutters.
Also included with each tape measure assembly is a new replacement spring (equivalent to Challenge Champion part number 4052).
Made in USA.
For other back gauge tape measures:
- For a back gauge tape measure for Challenge 193 cutters, see our part number G36029.
- For a back gauge tape measure for Challenge 265 cutters, see our part number G36035.
- For a back gauge tape measure for Challenge 305 cutters, see our part number G36717.
- For a back gauge tape measure for Challenge 370 cutters, see our part number G36033.
- For a back gauge tape measure for Challenge 265 & 305 F Series cutters, see our part number G27086.
- For a back gauge tape measure for Challenge 305 HA & HB cutters, see our part number G27081.
- For a back gauge tape measure for Challenge 305 HAE & HBE cutters, see our part number G36746.
- For a back gauge tape measure for Challenge 230 cutters, see our part number G11150.
Different
back gauge tape measure lengths, for other models of Challenge Champion
paper cutters, can be made to order. Call or email for information.
|
|
|
|
|
|
|
