Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Machine Parts >

G37954 - Hydraulic Knife Cylinder/Rebuilt w/Core Exchange/Same as Challenge # H-500 / Each
G37954 - Hydraulic Knife Cylinder/Rebuilt w/Core Exchange/Same as Challenge # H-500 / Each
 
Our Price: USD$750.00


Product Code: G37954

Description Technical Specs
 
Rebuilt and tested hydraulic knife cylinder.

Cylinder price is $750 plus $500 refundable Core Exchange Fee.
Features
We rebuild these cylinders in our machine shop.
We first pressure test the body for cracks that may leak. Cracks are welded and tested again.
All seals and wipers are replaced, regardless of condition, with the highest quality modern seals.
The cylinders are then compression tested to approx 30% - 50% over the rated PSI and checked for any leaks.
Cylinders that pass, are painted.

Core Exchange
To maintain inventory, we require a core cylinder to be returned to us for credit. When you purchase a rebuilt cylinder, you will be charged a core fee, that is included in the listed price. When we receive your old cylinder, inspect it, and find it to be rebuildable, you will be refunded the fee. (Usually within 3 days of us receiving the core)
  • If you do not have a core, the fee will remain added to the cost.
  • Not all cores are salvageable.


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Machine Parts
Cutting, Trimming and Slitting > Paper Cutter Parts > Challenge Cutter Parts & Supplies > Challenge Hydraulic Cylinders

Product price is not filled in. This product cannot be purchased.

Product price is not filled in. This product cannot be purchased.



G32593 - Compression spring, shoe tounge - Hohner Part #3936358 USD$26.60
G15160 - Replaced By: G20263 - Deluxe Part #RTM1278F
G21033 - Replaced By: 040114 - Deluxe Part #0305.2034.4
G24891 - Screw M5x0.8x12 - Deluxe Part #G20272 USD$2.30
HOHNER MODEL 43/6S STITCHING HEAD FOR DUPLO DBM 500 26-28 ga. - Hohner Part #0541862 USD$2,811.00
Wire-O Binding [5/8", Gold, 21 Loop 2:1 Pitch] Box 50 USD$24.51
G54011 - Cutting Curve - Hohner Part #3135347 USD$55.00
Muller-Martini Blade/14.173" L x 1.575" W x .590" Tk/Bottom left side/Model 241/890.0539.3/AKI-III Inlaid/Each USD$194.75 Each
G13517 - Stapler Head, 2EL-105, 66/6-8 - Deluxe Part #CPP1140 USD$92.40