 |
 |
 |
 |
|
 |
|
Features
This aftermarket scale is made from 5/8"
wide spring steel, the same as on the originals. The overall length is
91-3/4". The mounting slot measures 1/4" wide x 3/4" long.
This tape measure gauge fits many of the Challenge 30.5" size
cutters, such as the Challenge Champion 305 MB, 305 MBD, 305 MC, 305
MCD, and 305 MCPB guillotine paper cutters.
Has an inch and a metric side.
Also included with each tape measure assembly is a new replacement
tension spring (equivalent to Challenge Champion part number 4052) and
installation instructions.
Note: Older models (green/yellow) use increments of eighths and twelfths of an inch on their tapes and are labeled as such (Challenge part # A-4448). This tape will replace those and work the same, but the labeling on the magnifying glass would be the only change.
Made in USA.
For other back gauge tape measures:
- For a back gauge tape measure for Challenge 193 cutters, see our part number G36029.
- For a back gauge tape measure for Challenge 265 cutters, see our part number G36035.
- For a back gauge tape measure for Challenge 230 cutters, see our part number G11150.
- For a back gauge tape measure for Challenge 370 cutters, see our part number G36033.
- For a back gauge tape measure for Challenge 265 & 305 F Series cutters, see our part number G27086.
- For a back gauge tape measure for Challenge 305 HA & HB cutters, see our part number G27081.
- For a back gauge tape measure for Challenge 305 HAE & HBE cutters, see our part number G36746.
- For a back gauge tape measure for Challenge 305 H cutters, see our part number G36027.
Different
back gauge tape measure lengths, for other models of Challenge Champion
paper cutters, can be made to order. Call or email for information.
|
|
|
|
|
|
|
