 |
 |
 |
 |
|
 |
|
Features
This aftermarket scale is made from 5/8"
wide spring steel, the same as on the originals. The overall length is
100-3/8" long and the length between the end grommets is 99-3/4". The
holes in the brass end grommets for the spring are 1/4" in diameter.
The mounting slot measures 1/4" wide x 3/4" long. The distance from
the center of the "left" grommet, to the start of the tape measure
scale, is 9-13/16". Has an inch and a metric side.
This tape measure fits the model 305 HA and 305 HB (30.5") Challenge paper cutters.
Also included with each tape measure assembly is a new replacement spring (equivalent to Challenge Champion part number 4052).
Made in USA.
For other back gauge tape measures:
- For a back gauge tape measure for Challenge 193 cutters, see our part number G36029.
- For a back gauge tape measure for Challenge 265 cutters, see our part number G36035.
- For a back gauge tape measure for Challenge 305 cutters, see our part number G36717.
- For a back gauge tape measure for Challenge 370 cutters, see our part number G36033.
- For a back gauge tape measure for Challenge 265 & 305 F Series cutters, see our part number G27086.
- For a back gauge tape measure for Challenge 230 cutters, see our part number G11150.
- For a back gauge tape measure for Challenge 305 HAE & HBE cutters, see our part number G36746.
- For a back gauge tape measure for Challenge 305 H cutters, see our part number G36027.
Different
back gauge tape measure lengths, for other models of Challenge Champion
paper cutters, can be made to order. Call or email for information.
|
|
|
|
|
|
|
