Home > Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Gearbox, Flywheel And Pull Arm Area Parts >

G53776 - Polar Paper Cutter Pump Pulley 014187 and 014188
G53776 - Polar Paper Cutter Pump Pulley 014187 and 014188
 
Our Price: USD$310.00


Product Code: G53776

Description
 
V Belt Split Pulley Assembly for some Polar CE and EMC (EMC 1) Paper Cutters. (equivalent to Polar the original Polar part numbers 014188, 014187, and also 014183) This precision machined aluminum split pulley is a direct replacement for the original die cast pulley used on the tapered output shaft on some of the Polar Model CE hydraulic pumps, and on the 115 EMC 1, and 155 EMC 1 cutters. This pulley has been Hardcoat Anodized to give maximum hardness and wear resistance to the belt contact surfaces.
Features
V Belt Split Pulley Assembly for some Polar CE and EMC (EMC 1) Paper Cutters. (equivalent to Polar the original Polar part numbers 014188, 014187, and also 014183) This precision machined aluminum split pulley is a direct replacement for the original die cast pulley used on the tapered output shaft on some of the Polar Model CE hydraulic pumps, and on the 115 EMC 1, and 155 EMC 1 cutters. This pulley has been Hardcoat Anodized to give maximum hardness and wear resistance to the belt contact surfaces.
Included is both pulley halves, four steel adjusting shims (our part number G53774), and the three bolts to hold the two halves together. Each shim is .5mm (.020") thick. The pulleys have threaded steel inserts installed where the two pulley halves bolt together, similar to the originals, to prevent the screw threads from stripping out in the aluminum.
This is the "Long Hub" version of this pulley assembly. The hub length measures approximately 7/8". (See our part number G53775 for the 1/2" long "Short Hub" version.)
Fits Polar 72 CE paper cutter models after machine serial number 4851001.
Fits Polar 115 CE paper cutter models after machine serial number 4732001.
Fits all Polar 115 EMC 1 paper cutter models.
Fits all Polar 150 CE paper cutter models.
Fits all Polar 155 CE paper cutter models.
Fits all Polar 155 EMC 1 paper cutter models.
Made in USA.


Browse for more products in the same category as this item:

Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Gearbox, Flywheel And Pull Arm Area Parts
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Polar Hydraulic Parts


G48034 - Feed Wheel 52/8 Driven textured surface to assist with wire slippage - Hohner Part #3162763 USD$148.90
G49007 - Bender Bar Assembly 1/2 Cr, B2000 Kit - Deluxe Part #CAAA9013T3 USD$514.00
G11615 - Driving Slide Spring - Deluxe Part #CA9006 USD$4.75
G34064 - Self-Adhesive Stainless Steel Shim Tape ACCU-SHIM 5 - .005 Inches x 33 Feet (.13 mm x 10 m) USD$23.10
G13484 - Holder - Deluxe Part #CP1127 USD$71.40
G14445 - Cutter Operating Lever Cam - Deluxe Part #ESA-1547-6 USD$173.00
G34306 - timing belt 25T10-DL x 1880 - Hohner Part #4200926 USD$374.30
G50425 - Former 8mm Loop, 43/6S New Dec 2008 - Hohner Part #3164674 USD$767.00
G33069 - Screw, flat head: DIN 963: M4x25mm - Hohner Part #7604025 USD$1.61