Home > Shear Bolts (Polar, Prism, Saber, Wohlenberg) >

G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
 
Our Price: USD$34.00


Product Code: G40532

Description
 
G40532 - Polar Shear Bolt and Nut for Polar 145, 150EL & 155CE Paper Cutters
Features
Steel Shear Bolt for Polar 145, 150EL & 155CE Paper Cutters (221301) This steel shear bolt fits Polar 145, 150EL and 155CE paper cutters. The main shank on this shear pin is 80mm (3.15") long below the head. It has an M14 thread. A matching hex nut is also supplied with each bolt. (205518)
Steel Shear Bolts for Polar 145EL, Polar 150EL, Polar 150CE, Polar 155CE, and Polar 155 EMC (up to serial number 5221060) Paper Cutters. (equivalent to Polar 221301, 221302, 206685) The largest diameter on the shank on these shear pins or safety bolts is 14mm (.54"), except where it is undercut. It is 80mm (3.15") long below the head. It has an M14 thread.
A matching hex nut is also supplied with each of these shear bolts. (equivalent to Polar nut number 205518) Note that some of these were originally supplied with through holes at the break point and some were originally supplied with a groove at the break point. Both styles of safety bolts are interchangeable as they have been engineered to break at the same load. This shear bolt does not fit most of the Polar 155 EMC II cutters, or the Polar 155 E and Polar 155 ED paper cutters. For shear bolts for these machines, which only use one safety bolt per pull arm assembly, and with the cross pin through the head, see our part number G40533.


Browse for more products in the same category as this item:

Shear Bolts (Polar, Prism, Saber, Wohlenberg)
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies
Cutting, Trimming and Slitting > Paper Cutter Parts > Polar Parts & Supplies > Polar Shear Bolts

Product price is not filled in. This product cannot be purchased.



G25337 - Clincher Lever Assembly - Deluxe Part #G30043BA
G33584 - Eccentric Clamp, M50/8 Replaces #9459101 - Hohner Part #9959152 USD$497.70
G44607 - Terminal strip marker Weco type BEZ-302-12-VT - Hohner Part #4218017
G52707 - Bushing, main shaft support 6391K231 - Hohner Part #4468010
G39386 - Gripper Spring, N3B - Deluxe Part #D33884F USD$45.90
G50344 - Do Not Use, See Part #9935627 - Hohner Part #9535627
G48911 - Hog Tie Clincher Plate - 9mm Cr - Deluxe Part #ESA-1621-2 USD$788.00
G54203 - Washer, Heavy Duty M6 (Replaces 0034.5015) - Deluxe Part #071011 USD$1.65
G24031 - Electrical Cover - Deluxe Part #A1293 USD$103.00